Standard Program Package Installation; Installing Standard Program Package On Desktop Experience - NEC Express5800 Series Installation Manual

Chapter 1 Installing Windows
3.3

Standard Program Package Installation

Standard Program Package (SPP) contains drivers customized for this server.
Make sure to install Standard Program Package before running the server system.
System reboot is required after applying Standard Program Package.
This program can apply using iLO remote console and iLO virtual media.

3.3.1 Installing Standard Program Package on Desktop Experience

1. Sign-in to the Windows with an Administrators privilege.
2. Set the Starter Pack DVD to the drive.
3. Run the start_up.bat under the root folder on DVD.
4. Click Integrated Installation on the menu.
34
Important
 Make sure to update firmware by booting "Starter Pack DVD" before
applying Standard Program Package. If you mistake procedure, the
system may not start.
 When you use these options, refer to the following procedure to install
these drivers individually from "Starter Pack DVD" before installing SPP.
SPP may be stopped with error if you do not install the driver
beforehand.
When N8103-189/190/191/192/193/194/195/197/201/237/238 is
installed to the server
When the RAID controller is installed to the server,
\packages\cp047413.exe on the DVD to install the driver.
After that, restart the server.
Installation Guide (Windows Server 2022)
3. Installing Windows Server 2022