Download
Share
Print this page
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Measuring Instruments
  5. HP 7500 NetStream
  6. Manual

HP 7500 NetStream Manual

Monitoring module
Hide thumbs
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Manual Version: 6P103-20130125
HP 7500 NetStream Monitoring Module
1 Appearance
The silkscreen LSQ1NSMSC0 is printed at the upper right corner of the front panel, and it identifies the
module.
Figure 1 Appearance of the LSQ1NSMSC0
2 Specifications
The LSQ1NSMSC0 module provides one console port, one CF card slot, two USB interfaces, two
10/100/1000BASE-T management Ethernet copper interfaces, and two management Gigabit combo
interfaces.
Figure 2 Front panel of the LSQ1NSMSC0
(1) CF card eject button
(4) Console port (CONSOLE)
(7) Management Ethernet interface
1 (10/100/1000BASE-T)
(10) Management Ethernet
interface 1 LED (ACT)
(13) Management interface 3
(Electrical port of combo interface
10/100/1000BASE-T)
BOM: 3123A0F9
(2) CF card slot (CF CARD)
(5) USB interface 1 (reserved)
(8) Management Ethernet interface
2 (10/100/1000BASE-T)
(11) Management Ethernet
interface 2 LED (LINK)
(14) Management interface 4
(Electrical port of combo interface
10/100/1000BASE-T)
i
Part number: 5998-2243
(3) CF LED (CFS)
(6) USB interface 2 (reserved)
(9) Management Ethernet interface
1 LED (LINK)
(12) Management Ethernet
interface 2 LED (ACT)
(15) Management interface 3
(Optical port of combo interface
1000BASE-X)

Advertisement

loading

Related Manuals for HP HP 7500 NetStream

Summary of Contents for HP HP 7500 NetStream

  • Page 1 Manual Version: 6P103-20130125 BOM: 3123A0F9 Part number: 5998-2243 HP 7500 NetStream Monitoring Module 1 Appearance The silkscreen LSQ1NSMSC0 is printed at the upper right corner of the front panel, and it identifies the module. Figure 1 Appearance of the LSQ1NSMSC0...
  • Page 2 1000BASE-X SFP optical interface—For more information, see Table 3 One CF card slot, 256 MB by default for the external CF card CF card and slot 256 MB, 512 MB, or 1 GB for an optional external CF card Applied to HP 7500 series switches...
  • Page 3 Manual Version: 6P103-20130125 BOM: 3123A0F9 Part number: 5998-2243 Table 3 1000BASE-X SFP interface specifications Item Specification Connector SFP/LC Interface standards 802.3, 802.3u, and 802.3ab Short-haul Mid-haul Long-haul Long-haul Extra-long-ha multi-mode single-mode (1310 nm) (1550 nm) ul (1550 nm) (850 nm) (1310 nm) Type Optical...
  • Page 4 Manual Version: 6P103-20130125 BOM: 3123A0F9 Part number: 5998-2243 Figure 3 Insert the LSQ1NSMSC0 (1) Push the module into the slot along the guide rails until the positioning hole of the module is seated onto the positioning pin on the backplane. (2) Push the ejector levers inward to lock the module in place.
  • Page 5 5 Upgrading the LSQ1NSMSC0 The LSQ1NSMSC0 supports software upgrade through the console port and a management Ethernet interface on the module. For more information about how to upgrade the LSQ1NSMSC0, see HP Security Modules Software Upgrade Guide. The LSQ1NSMSC0 adopts independent boot and application programs, so the boot menu is different from the switch.

  • Page 6: Obtaining Documentation

    The LSQ1NSMSC0 does not support software upgrade through a switching and routing processing unit • (SRPU) of the switch. Using the XMODEM protocol to upgrade the module is relatively slow. To reduce the upgrade time, HP • recommends you to upgrade the module through the FTP/TFTP protocol.