Cisco 7500 Series Configuration Manual page 148

What Do I Do Now?
R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
To connect the network interfaces, refer to one of the following:
The companion
•
includes the following information:
–
–
–
–
–
–
–
–
• The configuration note Second-Generation Versatile Interface Processor (VIP2) Installation and
Configuration (Document Number 78-2658-xx), which shipped with your VIP, and the individual
port adapter configuration notes that shipped with your VIP-based port adapters.
These documents include the following information:
–
–
–
–
–
–
–
–
After you have connected all network interface cables, see
of the System."
For more complete software and protocol configuration information, refer to the companion Cisco IOS
software configuration publications, which are listed in the
Information" section on page
Note When configuring the interface processors installed in your Cisco 7500 series router, we also
recommend that you use the Interface Processor Installation and Configuration Guide in conjunction
with Chapter 4, "Performing a Basic Configuration of the System."
Cisco 7500 Series Installation and Configuration Guide
3-34
publicationInterface Processor Installation and Configuration
Complete descriptions of each interface processor and its electrical interfaces
Specific safety information for each interface processor, as appropriate
All electrical interface and interface cabling specifications
Cable pinouts (for cables supplied by Cisco Systems, except for bus and tag cables for the
Channel Interface Processor [CIP2]) and connector pinouts for all electrical interfaces on Cisco
Systems interface processors (again, except the CIP2)
Interface processor LED indications
Tools and parts required (including cables supplied by Cisco Systems)
Basic configuration information for each interface processor
Specific interface processor troubleshooting information not included in
"Troubleshooting a Cisco 7500 Series Router"
Complete descriptions of each VIP and VIP-based port adapters, and their electrical interfaces
Specific safety information for each port adapter, as appropriate
All interface and cabling specifications
Cable pinouts and connector pinouts for all electrical interfaces on the port adapters
Port adapter LED indications
Tools and parts required (including cables supplied by Cisco Systems)
Basic configuration information for each port adapter
Specific interface processor troubleshooting information not included in
"Troubleshooting a Cisco 7500 Series Router"
4-32.
Chapter 3 Installing a Cisco 7500 Series Router
Chapter 8,
Chapter 8,
Chapter 4, "Performing a Basic Configuration
"If You Need More Configuration
Guide, which
OL-5008-03 B0