Chapter 4 Configuration - GE PACSystems RX3i User Manual

Chapter 4 Configuration

This chapter provides configuration procedures for RX3i CEP Carriers and their I/O modules in a PROFINET I/O
network. For information on configuring the PROFINET I/O Controller and its LAN, refer to the I/O Controller
manufacturer's documentation.
Note: To configure RX3i CEP Carriers in an RX3i Controller system, refer to the PACSystems
RX3i & RSTi-EP PROFINET I/O Controller Manual, GFK-2571.
This chapter discusses the following topics:
• Configuration Overview
− Basic Configuration Steps
− Configuration Tool
• Adding RX3i CEP Carriers to a LAN
− Configuring RX3i CEP Carriers
− Adding RX3i I/O Modules to a Remote Node
▪
▪
▪
− Configuring Module Parameters
• Assigning IO-Device Names
• After the Configuration is Stored to the PROFINET I/O Controller
GFK-2883E
Adding and Configuring an Ethernet Port
Configuring Discrete Modules that have DIP switches
Configuring Analog Modules that have Jumpers
March 2018 35