Advertisement
5-4
RF OUTPUT
• Connect according to 5-2.
• Turn on the RF ON/OFF switch © on the panel.
• Select the desired band using the band selecting
switches © and ® on the panel.
• Select the desired channel using the tuning dial
®
on the panel.
• Turn on the S O U N D ON/OFF switch ® if the sound is
needed.
• The sound frequency is approximately
modulation level i s approximately
CG-921 and approximate 50kHz for CG-922. The sound
sub-carrier is 4.5 MHz for CG-921 and 55MHz for
CG-922.
6.
$
Before an external DC power supp ly i s used,
check the polarity of the plug.
the outside is © .
If the plug with reversed polarity is connected,
the generator and external DC power supply may
be destroyed.
#
In case the generator has a trouble, c a l l the
1 kHz.
The
sealer or our service section for repair.
25 kHz for
#
The attached battery should be replaced with a
battery that complies with the IEC Stanards.
PRECAUTIONS FOR USE
On this generator,
Advertisement
