Advertisement
DVG-7111S User's Manual
Rear Panel
1.
Line: Connect to your original telephone line on the wall jack with RJ-11 cable.
2.
Phone Port: Connect to your phones using standard phone cabling (RJ-11).
3.
WAN: Connect to your broadband modem using an Ethernet cable.
4.
LAN: Connect to your Ethernet enabled computers using Ethernet cabling.
5.
Power Receptor: Receptor for the provided power adapter.
6.
Reset : Use to Restore to factory default :
(1)
(2)
(3)
WARNING:
DO NOT
internal PBX line (FXS to PBX extension). Doing so may damage your VoIP TA.
D-Link Systems, Inc.
Power on.
Press and hold the reset button for 5 seconds.
Release the reset button. Factory settings will be restored.
connect any phone port directly to a PSTN line (FXS to PSTN) or to an
Telephone Interface Description
6
Advertisement
