Sharp SDW6767HS Quick Start Manual

QUICK START GUIDE
Dishwasher Cycle and Washing Options
CYCLE
Zone Wash Power Wash
Auto NA NA
Heavy Duty
Normal
Light
Express Wash
Rinse Only NA NA
Washing Options
1. Delay – Touch and hold Delay until desired delay time is displayed.
2. Wash Zone – Not available for Auto and Rinse Only cycles.
3. Power Wash – Place heavily soiled dishes facedown in lower rack directly above the Power Wash arm in the back left
corner of the dishwasher.
4. Fan Dry – Extends drying time for improved drying performance.
5. High Temp Wash – Maintains 140°F (60°C) water temperature.
6. Heat dry – Operates heater during the drying process.
7. Sanitize - Maintains 158°F (70°C) water temperature.
Operations and Displays
1. POWER – Touch and hold Power for 3 seconds to turn on/o the dishwasher.
2. START/CANCEL – Select desired wash cycle, touch START/CANCEL and close the door within 4 seconds to start
wash cycle.
3. Display Window – Displays the remaining hours and minutes of the running cycle, delay hours, error codes, etc.
4. Wi-Fi Indicator Light – Indicates successful network connection.
5. Rinse Aid Indicator Light – Indicates low Rinse Aid level.
6. Sanitized Indicator Light – Indicates Sanitized function is complete.
7. Child Lock Indicator Light – Indicates Child Lock is enabled. Touch and hold Light and Express Wash together for
3 seconds to disable or enable Child Lock.
SHARP ELECTRONICS CORPORATION • 100 Paragon Drive • Montvale, New Jersey 07645 • USA
Available Washing Options
Hi Temp Sanitize Heated Dry
NA NA NA
4
WI-FI SPECIFICATIONS
Wireless LAN: IEEE802.11b/g/n
Fan Dry
Frequency range: 2.4GHz frequency band
There are three di erent ways to connect your dishwasher to Amazon Alexa. First, download the Amazon
Alexa app, then connect your Dishwasher to Wi-Fi using one of three methods: With a Barcode, Without a
NA
Barcode and Zero Touch Setup. Next, you need to enable Remote Command & Control.
Step 1: Wi-Fi Connection
NA
Option 1: With a Barcode
Touch Power to turn on the dishwasher, then touch and hold Rinse Only and Hi Temp Wash together
for 5 seconds until "FR" appears on the display.
Open the Amazon Alexa app, select Devices and touch + to add a device. Select the type of device and
follow instructions to scan the barcode located on the right side of the inner part of the door.
Sharp
QUICK START GUIDE
DISHWASHER MODEL: SDW6767HS
2
Add Device
1
Devices
The barcode is located
on the inner part of the
right side of the door
1
5
S
Dishwasher
Proceed to Step 2:
Enable Remote
Command & Control