Lifting Loads - ABB HT608562 Operation Manual

Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
2 Safety / 2.9 Lifting loads

2.9 Lifting loads

© Copyright 2020 . All rights reserved.
WARNING
Suspended loads
Loads not suspended in compliance with regulations may lead to per-
sonal injury or accidents with fatal consequences.
Loads must always be fastened to technically perfect lifting gear
u
with sufficient loading capacity.
Make sure the load is suspended properly on the crane hook.
u
Do not let anyone stand beneath a suspended load.
u
Wear safety gloves to protect against mechanical hazards.
Wear safety helmet.
In the case of two or more suspension points, the slinging angle must
not exceed 45°. This avoids excessive loading due to inclined tensile
loading.
Fasten turbocharger assemblies / components as described in re-
u
spective handling steps.
Before attaching slings, allow turbocharger components to cool down
u
(maximum 80°C).
Use suitable protection at sharp edges.
u
Completely screw in assembly / fitting devices without fail so that
u
they cannot work loose during use.
Use assembly / fitting devices only for applications described.
u
Make sure removed turbocharger components stand safely and se-
u
curely.
HZTL2498_EN Rev.F December 2020