Download Print this page

Sharp FP-A80M Operation Manual page 5

Advertisement

television reception, try one or more of
the following measures:
• Adjust or reposition the receiving
antenna.
• Increase the distance between the
product and the radio or TV.
• Connect the equipment into an outlet
on a circuit different from that of the
radio or TV receiver.
• Consult the dealer or a qualified radio
or TV technician.
CAUTIONS CONCERNING
OPERATION
• Do not block the Air Inlet or Air Outlet.
• Do not place the product near or
on hot objects, such as stoves or
heaters, or where it may come into
contact with steam.
• Always operate the product in an
upright position.
• Do not move the product when it is in
operation.
• When moving the product, use the
handles on both sides.
• If the product is on easily damaged
flooring, an uneven surface, or thick-
piled carpet, lift it up when moving.
• Do not operate the product without
the filters properly installed.
• Do not wash and reuse the HEPA filter
and the Deodorizing Pre filter. Doing
so will not improve filter performance
and can also cause electric shock or
operating malfunctions.
• Clean the exterior with a soft cloth
only. Do not use volatile fluids or
detergents. The product surface may
be damaged or cracked with Benzine
paint thinner or polishing powder. In
addition, the sensors may malfunction
as a result.
• Do not scrub the Back Panel hard
during its maintenance.
INSTALLATION
GUIDELINES
• Avoid locations where the sensors
are exposed to direct wind. Doing so
can cause the product to malfunction.
• Avoid locations where furniture,
fabrics, or other objects can come in
contact with the product and interfere
with the inlet and outlet of air.
• Avoid locations where the product is
exposed to condensation or drastic
changes in temperature. Appropriate
room temperature is between 0 – 35
ºC.
• Place the product on a level and
stable surface with sufficient air
circulation. When placed on heavy
carpet, the product may vibrate
slightly.
• Avoid locations that generate grease
or oily smoke. Doing so can cause
the product exterior to crack and the
sensors to malfunction.
• The dust collecting ability of the
product is effective even when the
product is as close to 3 cm from
the wall, the surrounding walls and
floor may get dirty. Please place the
product at a distance from the wall.
The wall directly behind the Air Outlet
may become dirty over time. When
using the product for an extended
period of time at the same location,
periodically clean the walls adjacent
to it.
FILTER GUIDELINES
• Follow the instructions in this manual
for proper filter care and maintenance.
3

Advertisement

loading