Advertisement
Quick Links
INSTRUCTIONS
COMPACT VHS CAMCORDER
GR-SXM58
GR-SXM48
GR-FXM383
GR-FXM38
GR-SX24
GR-FX14
Dear Customer,
Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read
"PRECAUTIONS" (
Automatic Demonstration takes place when "DEMO MODE" is set to "ON"
(factory-preset).
• Available when the Power Switch
• Performing any operation during the demonstration stops the demonstration temporarily. If no operation
is performed for more than 1 minute after that, the demonstration will resume.
• "DEMO MODE" remains "ON" even if the camcorder power is turned off.
• To cancel Automatic Demonstration, set the Power Switch
while the demo is in progress. This takes you directly to the demo mode's Setting Menu (so you will not
have to go through the main Menu Screen). Rotate the MENU Wheel
NOTES:
• When a tape whose Erase Protection tab is in the position that allows recording is loaded in the
camcorder, demonstration is not available.
• If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration
activated on the LCD monitor* or viewfinder.
* Applicable models only.
pg. 3, 4) to ensure safe use of this product.
AUTOMATIC DEMONSTRATION
@
is set to "
ENGLISH
S-VHS is compatible with
GR-SXM58/SXM48/SX24
only
COPYRIGHT© 2001 VICTOR COMPANY OF JAPAN, LTD
" or "
".
@
to "
" and press the MENU Wheel
1
Printed in Malaysia
EG
1001MKV
1
to select "OFF" and press it.
LYT0860-001B
VHS
PAL
625
*
UN
*
PJ
1
in
Advertisement
Related Manuals for JVC GR-FXM383
Summary of Contents for JVC GR-FXM383
- Page 1 Printed in Malaysia 1001MKV COPYRIGHT© 2001 VICTOR COMPANY OF JAPAN, LTD Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read “PRECAUTIONS” ( pg. 3, 4) to ensure safe use of this product. AUTOMATIC DEMONSTRATION Automatic Demonstration takes place when “DEMO MODE”...
- Page 2 PROVIDED ACCESSORIES • Battery Pack BN-V11U (GR-SXM48/FXM383/ FXM38/SX24/FX14) BN-V20U (GR-SXM58) • AC Adapter AP-V12EG, AP-V11EG or AP-V10EG • Power Cord • Shoulder Strap • A/V (Audio/Video) Cable • Lens Cap • Cable Adapter • S-Video Cable (GR-SXM58/SXM48/ SX24 only) • CD-ROM •...
- Page 3 However, live recording and LCD monitor*/viewfinder playback are possible anywhere. • Use the JVC BN-V11U**/V12U/V20U/V400U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter. (An...
- Page 4 When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear). Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper, or cloth etc.
- Page 5 INDEX AC Adapter ..............pg. 6 Picture Stabiliser ............pg. 12 Animation Recording ..........pg. 21 Playback ..............pg. 11 Auto Date Record ............ pg. 19 Playback Special Effects .......... pg. 14 Auto Focus ............... pg. 18 Programme AE with Special Effects ......pg. 24 Auto Shut Off ............
- Page 6 GETTING STARTED USING THE BATTERY PACK Perform step 1) of “CHARGING THE BATTERY Hook on. PACK”. Approximate recording time (unit: min.) Battery pack Viewfinder on LCD monitor on Push in. BN-V11U (50) (50) (45) BN-V12U (optional) (50) (50) (45) BATTERY RELEASE Switch BN-V20U (85) (90)
- Page 7 • Recording time is reduced significantly when built-in clock battery runs out. Consult an Zoom or Record-Standby mode is engaged authorised JVC dealer for replacement, or set the repeatedly or the LCD monitor* is used date/time as necessary before you start shooting.
- Page 8 Grip Adjustment Tripod Mounting 1) Separate the Velcro strip. Align the screw and camera direction stud on the 2) Pass your right hand through the loop and grasp tripod with the tripod mounting socket . Then the grip. tighten the screw. 3) Adjust so that your thumb and fingers can easily CAUTION operate the Recording Start/Stop Button...
- Page 9 CONTROLS, CONNECTORS AND INDICATORS Eyepiece Refer to this diagram while reading the instructions. & During shooting Keep the lens cap attached to the camcorder. ) q w e Cassette holder 90° 90° 180° Turn the gear to Viewfinder take up slack. Speaker (applicable models only) LCD monitor...
- Page 10 8 Camera Sensor Applicable models only. Be careful not to cover this area; a sensor GR-SXM58/SXM48/SX24 only. necessary for shooting is built-in here. GR-FXM383/FXM38/FX14 only. Grip Strap ..........pg. 8 GR-SXM58 only. Tripod Mounting Socket ......pg. 8 GR-SXM58/SXM48/FXM383/SX24 only.
- Page 11 RECORDING PLAYBACK Set REC MODE, S-VHS (S-VHS ET)**, TAPE Load a tape ( pg. 8, “Loading/Unloading A LENGTH and DATE/TIME in SYSTEM MENU. Cassette”). pg. 18 – 22, “MENU SETTINGS”) Set the Power Switch to “ ”. To start playback, press 4/6 Remove the lens cap.
- Page 12 BASIC FEATURES 5Sec. Rec (5-sec. Recording) (GR-FXM383/FXM38/FX14 only) Snapshot (GR-SXM58/SXM48/SX24 only) To record a scene for 5 seconds, providing quick scene transitions like those seen in TV You can record still images that look like programmes. photographs onto a tape.
- Page 13 • The zoom level indicator moves during • It is recommended that you consult your nearest zoom. Once the zoom level indiator JVC dealer for replacing the video light. reaches the top, all magnification from that point Quick Review is through digital processing.
- Page 14 Tracking Counter Memory Eliminates noise bars that appear on-screen during Makes it easier to locate a specific tape segment. playback. To activate Manual Tracking: 1) Press COUNTER R/M and hold for more than 1) Press the TRACKING Wheel for approx. 1 second.
- Page 15 Connections To A TV/VCR Tape Dubbing 1) Make sure all units are turned off. 1) Connect the camcorder and the VCR 2) Connect the camcorder to a TV or VCR. If using “Connections To A TV/VCR”). Set the Power both TV and VCR, connect the VCR output to Switch to “...
- Page 16 Using The Cassette Adapter Connection To A Personal Computer (optional) (GR-SXM58 only) You can transfer image data from the camcorder to Use this to play back an S-VHS-C/VHS-C video a PC using Digital Photo Navigator. When cassette recorded with this camcorder on a S-VHS/ connecting to your PC, refer to the instruction VHS VCR.
- Page 17 INSTRUCTIONS Eyepiece Refer to this diagram while reading the instructions. & During shooting Keep the lens cap attached to the camcorder. ) q w e Cassette holder 90° 90° 180° Turn the gear to Viewfinder take up slack. Speaker (applicable models only) LCD monitor (applicable models only) Erase...
- Page 18 MENU SETTINGS CAMERA MENU FOCUS Set the Power Switch to “ ”. If correct focus cannot be obtained with AUTO Press the MENU Wheel in. The Menu FOCUS, set to MANU to use manual focusing. Screen appears. Rotate the MENU Wheel “...
- Page 19 M.W.B. TITLE If the white balance is correct, all other colours will Allows you to superimpose one of eight preset be accurately reproduced. titles in 2 different languages. Change the language in TITLE LANG. ( pg. 22) in SYSTEM AUTO : White balance is adjusted MENU.
- Page 20 Technology). S-VHS REC appears during recording. OFF: Records in VHS on a VHS or S-VHS cassette. • JVC EHG (Extra High Grade) tapes are recom- mended for superior results. Use S-VHS tape for storing recordings for an extended period or for recording important scenes, as it enables higher-quality recording and playback.
- Page 21 TAPE LENGTH INT. TIME Allows you to set the tape length depending on the You can record sequentially at preset time spans. tape used: T30=30 minutes, T45=45 minutes, Leaving the camcorder aimed at a specific subject, T50=50 minutes, T60=60 minutes. you can record subtle changes over an extended •...
- Page 22 MENU LANG. DEMO MODE Allows you to select the language (ENGLISH or Demonstrates certain functions automatically. RUSSIAN) of messages only in menu screens Available when the Power Switch is set to “ ” (CAMERA MENU, SYSTEM MENU or their sub- or “...
- Page 23 ADVANCED FEATURES Fade/Wipe Effects Fade- or wipe-in works at recording start, and fade- Night-Scope (GR-SXM58/SXM48/SX24 only) or wipe-out works at recording end. Makes dark subjects or areas even brighter than 1) Set the Power Switch to “ ”. they would be under good natural lighting. 2) Press FADE/WIPE repeatedly until the 1) Set the Power Switch...
- Page 24 Programme AE With Special Effects Digital Effects 1) Set the Power Switch to “ ”. 1) Set the Power Switch to “ ”. 2) Press P.AE repeatedly until the desired mode 2) Press DIGIFECT repeatedly until the desired appears. mode appears. •...
- Page 25 TROUBLESHOOTING Before consulting your JVC dealer, please check the following to see if you can correct the problem yourself. Vertical white lines appear when shooting a very Playback picture is blurred or interrupted. bright object. • The video heads are dirty or worn out. Consult your •...
- Page 26 • Do not use near flammable or explosive materials..remove from charger or powered unit when not in use, as • It is recommended that you consult your nearest JVC dealer some machines use current even when switched off.
- Page 27 ..in a closed car in summer. If malfunctioning occurs, stop using the unit immediately ..near a heater. and consult your local JVC dealer..in dusty places such as a beach. 4. To protect the unit, DO NOT . . .
- Page 28 Some accessories are not available in some areas. downward) Please consult your nearest JVC dealer for details on accessories and their availability. * Applicable models only. Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject to...