Download Print this page

Hitachi CP-X3 Technical Manual

Hitachi cp-x3: supplementary guide
Hide thumbs Also See for CP-X3:

Advertisement

Quick Links

Projector
CPX3
User's Manual (detailed)
Technical
Example of PC signal
Resolution (H x V) H. frequency (kHz) V. frequency (Hz)
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
024 x 768
024 x 768
024 x 768
024 x 768
52 x 864
280 x 960
280 x 024
280 x 024
*280 x 024
*600 x 200
280 x 768
400 x 050
NOTE
• Be sure to check jack type, signal level, timing and resolution
before connecting this projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some
cases. Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA
(600x200), the signal will be converted to the projector's panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and projector panel are identical.
• Automatically adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a
composite sync or a sync on G.
・HDMI input does not support the signals marked with *.
37.9
3.5
37.9
37.5
43.3
35.2
37.9
48.
46.9
53.7
49.7
48.4
56.5
60.0
68.7
67.5
60.0
64.0
80.0
9.
75.0
47.7
65.2
Rating
85.0
VESA
59.9
VESA
72.8
VESA
75.0
VESA
85.0
VESA
56.3
VESA
60.3
VESA
72.2
VESA
75.0
VESA
85.
VESA
74.5
60.0
VESA
70.
VESA
75.0
VESA
85.0
VESA
75.0
VESA
60.0
VESA
60.0
VESA
75.0
VESA
85.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
Signal mode
TEXT
VGA (60Hz)
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 6" mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
52 x 864 (75Hz)
280 x 960 (60Hz)
SXGA (60Hz)
SXGA (75Hz)
SXGA (85Hz)
UXGA (60Hz)
W-XGA (60Hz)
SXGA+ (60Hz)


Advertisement

loading

Summary of Contents for Hitachi CP-X3

  • Page 1 • Depending on the input signal, full-size display may not be possible in some cases. Refer to the number of display pixels above. • Although the projector can display signals with resolution up to UXGA (600x200), the signal will be converted to the projector’s panel resolution before being displayed.
  • Page 2 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Display interval (C) Data...
  • Page 3 Connection to the ports S-VIDEO VIDEO COMPUTER IN1, D-sub 5pin mini shrink jack (1) for PC signal • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) • H/V. sync. Signal: TTL level (positive/negative) • Composite sync. Signal: TTL level Signal Video Red Video Green...
  • Page 4: Audio Out

    Connection to the ports (continued) S-VIDEO VIDEO S-VIDEO Mini DIN 4pin jack Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator Color signal 0.300Vp-p (PAL/SECAM, burst) 75Ω terminator Brightness signal, 1.0Vp-p, 75Ω terminator Ground Ground VIDEO RCA jack • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43 •...
  • Page 5 S-VIDEO VIDEO USB B type jack Signal  +5V 2 - Data 3 + Data 4 Ground HDMI • Type :Digital audio/video connector • Audio signal : Linear PCM (Sampling rate; 32/44./48 kHz) Signal T.M.D.S. Data2 + T.M.D.S. Data2 Shield T.M.D.S.