Safety; Introduction; Ce Conformity - ABB HT564492 Operation Manual

Operation Manual / 2 Safety / A100-M axial
1

Safety

1 Safety
1.1

Introduction

Turbochargers manufactured by ABB Turbo Systems are state of the art and comply with the
respective health and safety standards in effect at the time the turbocharger was built. This
ensures safe operation of the turbocharger. Nevertheless, there may be some residual risks
during operation of and work on the turbocharger which:
 Are caused by the turbocharger itself or its accessories.
 Are caused by the operating equipment used or supplies and materials.
 Are a consequence of insufficient compliance with safety instructions.
 Are a consequence of insufficient or inappropriate performance of maintenance and in-
spection work.
The operating company is responsible for defining measures that regulate safe access to and
safe handling of the turbocharger.
All instructions contained in this chapter must be observed for safe and trouble-free operation
of the turbocharger and during all work on the turbocharger.
All further safety instructions contained and specifically identified in every chapter of this man-
ual (Definition of safety instructions [➙ 4]) must also be observed.
1.2

CE conformity

Information
ABB turbochargers comply with the Machinery Directive 2006/42/EC and are incomplete ma-
chines as defined by Article 2 g.
© Copyright 2016 ABB. All rights reserved. HZTL4023_EN
Page 3 / 17
Revision B May 2016