Brake System Exploded View - Polaris RANGER 2x4 Manual

BRAKES

BRAKE SYSTEM EXPLODED VIEW

LH Rear Line
Rear Caliper
FRONT BRAKE PEDAL REMOVAL / INSTALL
1. Open the hood. Locate the master cylinder.
2. Remove the nut, bushing, tube, and bolt from the
brake pedal.
3. Remove the clevis pin and cotter key from the
master cylinder to remove the brake pedal.
4. Reverse Steps 1--3 for foot brake installation.
After installing the foot brake check pedal
freeplay. Pedal freeplay should not exceed .090"
(2.286 mm).
Brake Pedal Freeplay:
.090' (2.286 mm)
Master Cylinder
Fitting Tee
Banjo Bolt & Seals
MC Rear Brake Line
RH Rear Line
Left Front Brake Line
MC Front Brake Line
Screws
Right Front Brake Line
Front Caliper
Master Cylinder
Tube
Cotter
Nut
Bushing
Key
Brake Switch
Tee Line
Bolt
Bushing
Clevis Pin
Brake Pedal
9.5