Sealey SWH199 Instructions

Declaration of Conformity
We, the sole importer into the UK, declare that the products listed here are
in conformity with the following EEC standards and directives. The construction files for these products are held
by the Manufacturer and may be inspected on request by contacting Jack Sealey Ltd
Automatic Welding Helmet
Signed by Mark Sweetman
Models SWH199, SWH299, SWH399
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products
BS EN 175:1997 BS EN 379:1994
BS EN 169:2002
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment. WARRANTY: Guarantee is 12 months from purchase date.
proof of which will be required for any claim. INFORMATION: Call us for a copy of our latest catalogue on 01284 757525 and leave
your full name and address including your postcode.
Sole UK Distributor
Sealey Group, Bury St. Edmunds, Suffolk.
01284 757500
01284 703534
16th July 2003
E-mail: sales@sealey.co.uk
SWH199-299-399 - 3 - 16/07/03
INSTRUCTIONS FOR:
A U TO M AT I C W E L D I N G H E L M E T
SWH199, SWH299,
Models:
Thank you for purchasing a Sealey Power Product. Manufactured to a high
standard this product will, if used according to these instructions and properly maintained,
give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR
WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL INJURY, AND WILL
INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
The SWH range of Automatic Welding Helmets come ready for use. Batteries are not necessary as operation is
by means of Solar cells which automatically darken the eye shade cartridge when the arc is struck.
1. SAFETY INSTRUCTIONS
Ensure all workshop safety rules, regulations, and conditions are complied with when using welding equipment.
The helmet will not offer protection against mis-use of workshop tools, equipment, or accessories.
Maintain the helmet in good condition, and protect cartridge from liquid and dirt contact.
Regularly replace the protective lenses and replace any damaged or worn parts. Use genuine parts only.
Non authorised parts may be dangerous and will invalidate the warranty.
NEVER open or tamper with the shade cartridge.
F WARNING! This helmet is not suitable for use with laser and gas-welding.
Ensure the front cover lens and front lens frame are securely in place before use.
p
Fit the helmet and adjust the head band so the helmet will sit as low and near to your face as possible,
Use helmet only in temperatures ranging from -10
The eye protective plate in helmet is NOT unbreakable. Helmet will not protect you against severe impact
hazards (such as, but not limited to) fragmenting abrasive discs/grinding wheels, stones and other grinding
tools, explosive devices or corrosive fluids. The helmet will only protect the eyes and face from radiation and sparks.
Remove ill fitting clothing, remove ties, watches, rings, and other loose jewellery.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non slip shoes.
Keep children and unauthorised persons away from the working area.
F WARNING! DO NOT use the helmet if damaged or you suspect it may be faulty. (Contact Service Agent).
DO NOT use helmet unless you have been instructed in its use by a qualified person.
p
DO NOT get the helmet wet or use in damp or wet locations.
DO NOT leave work area with helmet in lowered position, as bright light source may darken cartridge unexpectedly.
DO NOT place the helmet on a hot surface.
Clean helmet (see chapter 5) and store the helmet in a safe, dry, childproof location.
I
DANGER! If, at any time, the face plate in the cartridge FAILS to darken when exposed to a welding spark,
DO NOT USE. Remove cartridge and return to your dealer for service/inspection. Continued use of the
s
product knowing that the auto darkening feature is not functioning may damage your eyes and cause
blindness. Continued use of the helmet which is not functioning will invalidate the warranty and could
prohibit a successful claim on any insurance policy.
2. SPECIFICATIONS & TECHNICAL DATA
Type Model . . . . . . . . .SWH199 = Automatic 4/10
. . . . . . . . . . . . . . . . . .SWH299 = Automatic 4/10 4/11 with Manually adjust slide switch
. . . . . . . . . . . . . . . . . .SWH399 = Automatic 4/10-11 or 4/11-12
Light transmittance . . . .SWH199 = Visible range not activated: Shade level 4. Visible range activated: Shade level 10
. . . . . . . . . . . . . . . . . .SWH299 = Visible range not activated: Shade level 4. Visible range activated: Shade levels 10 or 11
. . . . . . . . . . . . . . . . . .SWH399 = Visible range not activated: Shade level 4. Visible range activated: Shade levels 10-11 or 11-12
Specifications common to All Models
Operating temperature (all models) . . . . . . .-10 C (+14
0
Water-resistant (all models) . . . . . . . . . . . . .Waterproof in accordance with IP67 (test duration 30min. depth 1 m / 3,28’
Helmet material (all models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .High-impact plastic, stability of shape up to 220
UV/|IR protection (all cartridge states) (all models) = . . . . . . . . . . . .Maximum
Response (light to dark @ room temp) (all models) = . . . . . . . . . . .0.4ms
Response (light to dark +55 C/131 F) (all models) = . . . . . . . . . . . . .0.1ms
0 0
Response (dark to light) (all models) = . . . . . . . . . . . . . . . . . . . . . . .0.2 to 0.3 s
Viewing area (all models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 x 38mm (3.86 x 1.5”)
Cartridge size (all models) = . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90x110x7mm (3.54x4.33x0.28”)
Weight Helmet (all models) = . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .460g
Energy source (all models) = . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Solar cells
Tig Welding (SWH399) = . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .From 50amps
SWH399
&
C (+14 F) and + 70 C (+158 F).
0 0 0 0
F) and + 70 C (+158 F).
0 0 0
C / 428 F
0 0