Prerequisites
Rack Stability
When installing the chassis in any rack that is not secured to the floor or overhead structure, place
the chassis in the lower half of the rack. A fully-configured chassis weighs 145 pounds (65.8 kg),
and a shift in the weight distribution (during the installation or later as a result of disturbance to the
rack) can cause the rack to fall.
Figure 7
Foot diameter
Foot thread size
12 Cisco 7000 and Cisco 7507 Rack-Mount Kit Installation Instructions
Chassis Footprint and Outer Dimensions
10" clearance required for
interface processor removal
1.220"
1.125
4 places
5/16"
4 places
Power supply/interface processor end
for power supply removal
4"
13"
15.060"
17.5"
Plastic front panel end
16" clearance required
16"
(28" including
power cord)
5.095"
25"
16.916"