Yamaha DTX-PRO Reference Manual page 39

MENU Button
Screen Parameter Settings
WaitTime 1–64 (msec)
RimGain 1–127
H/R Balance H49–H1, 0, R1–R49
Description
Sets the time until the target pad detects a trig-
ger signal. Adjust the setting so that the trigger
signal is detected at its peak and that the
strength for striking the pad corresponds to the
volume of the sound produced.
Sets the rim gain level of a multi-piezo pad con-
nected to a multi-piezo supported jack.
When using a mono × 2 input jack, this parame-
ter is effective only in the paired input mode.
Sets the balance between the head and rim of a
multi piezo pad. If the head sound is produced
when the rim is struck, increase the R value to
make the rim sound louder.
If the rim sound is produced when the head is
struck, press the [–] button to increase the H
value to make the head sound louder. When
using a mono × 2 input jack, this parameter is
effective only when the input mode is set to
"paired."
DTX-PRO Reference Manual 39