AEG SANTO 70318-5 KG User Manual page 20

20
Installation
2. Slide the bottom door off the middle
hinge (H). Remove the middle hinge by
unscrewing the fixing screws.
3. Slide the top door off the pin (G). Un-
screw the pin (G) and install it on the
opposite side.
4. Remove the two plugs from the middle
crossbeam and install them on the op-
posite side, covering the holes left from
the removed hinge.
5. Remove the plugs (1) on the upper side
of both doors and move them to the
other side.
6. Remove the handle. Unscrew the top
handle bracket from the handle rod (h1).
Unscrew the bottom handle bracket
from the door (h2). Unscrew the top
handle bracket from the door (h3).
Install the plug (1).
1
h1 h2
H
G
h3