Table of Contents
Advertisement
en-us Troubleshooting
Issue
Plastic parts are dis-
colored.
There are remov-
able streaks on
glasses, glassware
with a metallic ap-
pearance and silver-
ware.
50
Cause and troubleshooting
Dishwashing temperature is too low.
Select a program with a higher dishwashing
▶
temperature.
Dishware has been precleaned too intensively.
Then the sensors choose a lighter cycle. Stub-
born remnants cannot be entirely removed.
Only remove large remnants of food and do not
▶
pre-rinse dishware.
Adjust the sensitivity of the sensors.
▶
→ "Sensors", Page 10
Amount of rinse aid to be dispensed is set too
high.
Set the rinse aid system to a lower setting.
▶
No rinse aid has been added.
→ "Adding rinse aid", Page 25
▶
There is detergent residue in the final rinse. Lid of
detergent dispenser is blocked by dishware and
will not open fully.
Arrange dishware in the upper rack so the tab
1.
collecting tray is not obstructed by dishware.
→ "Loading dishware", Page 30
Items of dishware are blocking the dispenser
lid.
Do not place dishware or fragrance dispensers
2.
in the tab collecting tray.
Dishware has been precleaned too intensively.
Then the sensors choose a lighter cycle. Stub-
born remnants cannot be entirely removed.
Only remove large remnants of food and do not
▶
pre-rinse dishware.
Adjust the sensitivity of the sensors.
▶
→ "Sensors", Page 10
Hide quick links:
Advertisement
Table of Contents
