Power-On And Automatic Adjustment; Turning The Power On; Automatic Adjustment Using The Auto Button - Sony LKRA-003 Operating Instructions Manual

Power-on and
Automatic
Adjustment

Turning the Power on

When the connection to the Media Block or
SMS server is completed, turn on the unit
according to the following procedures:
1
Connect the supplied AC adaptor to
the DC IN connector and to a wall
outlet.
2
Turn on the unit.
Set the POWER switch to ?.
3
Turn on the Media Block or SMS
server.
If an appropriate input signal is detected,
the status indicator lights in green.
Notes
• Be sure to turn on this unit first, then turn on
the Media Block or SMS server. Otherwise
the Media Block or SMS server may not
output a proper signal.
• If "NO INPUT SIGNAL" or "NOT
SUPPORT" is displayed on the monitor
screen, check the connection and reconnect
correctly.
To turn off the unit
Set the POWER switch to a.
Automatic Adjustment Using
the AUTO Button
You can perform the color and picture
adjustments automatically, using the AUTO
button.
After automatic adjustment, you can
perform fine adjustments on the menu.
Note
When the unit is turned on, wait 20 minutes or
more before starting automatic adjustment. For
the adjustment, display a bright picture on the
screen.
If you perform automatic adjustment 20
minutes or less after the unit has been turned
on, the phase may be shifted.
1
Make sure that the menu is not
displayed on the screen.
2
Hold the AUTO button pressed for one
second or more.
POWER
"ADJ" is displayed and the following
items are adjusted automatically.
The "ADJ" display will disappear when
adjustment is finished.
Items to be adjusted automatically
Color adjustments: Contrast, Brightness,
Color Temp. (Color Temperature), Color
Adj. (Color Adjustment)
Picture adjustments: H.Position
(Horizontal Position), V.Position (Vertical
Position), Phase, Clock

Power-on and Automatic Adjustment

AUTO
31