Specification - Sony LinkBuds S YY2950 Reference Manual

Help Guide
Wireless Noise Canceling Stereo Headset
LinkBuds S
Unable to turn on the headset.
Make sure the battery is fully charged.
You cannot turn on the headset when the headset is placed and being charged in the charging case. Remove the
headset from the charging case to turn it on.
Charge the charging case.
Set the headset into the charging case and close the lid of the charging case.
You may be able to resolve some issues by setting the headset into the charging case.
When Service Link is turned on with the "Sony | Headphones Connect" app, use the right unit of the headset. You
cannot use only the left unit of the headset.
Depending on the assignment of the touch sensors and/or the Voice Assistant setting, you may not be able to use
only one unit of the headset.
Refer to the following and check the setting in the "Sony | Headphones Connect" app.
Voice Assistant setting
menu item
[Voice Assist Function of
Mobile Device]
[Google Assistant] or
[Amazon Alexa]
[Do not use]
Reset the headset.
Initialize the headset, and pair the headset and the device again.
Related Topic
Charging
Checking the remaining battery charge
Turning on the headset
Resetting the headset
Initializing the headset to restore factory settings

Specification

Either unit of the headset can be used.
Only the headset unit with the Touch Sensor Control function set to [Playback
control] can be used.
Assign the [Playback control] function to the headset unit you want to use.
In the factory settings, [Playback control] is assigned to the right unit.
When you assign [Playback control] to both headset units, full functionality is only
available on the right unit.
Either unit of the headset can be used.
5-035-792-11(1) Copyright 2022 Sony Corporation
132