Table of Contents
Advertisement
2.4 Personnel qualifi cations
The activities described in this document require basic knowledge of mechanical,
electrical and pneumatic systems, as well as familiarity with the corresponding
technical terms. Additional knowledge regarding the use of lifting gear and
corresponding slings is required for transporting and handling the product.
To ensure safe use, these activities should therefore only be performed by qualifi ed
personnel or by an instructed person acting under the direction of such a person.
"Qualifi ed personnel" refers to those who can recognize potential hazards and
take appropriate safety measures based on their technical training, knowledge,
experience, and understanding of the relevant regulations pertaining to the work
being performed. Qualifi ed personnel must comply with the relevant technical
regulations and have the necessary expertise.
In the case of pneumatic products, for example, expertise means:
• The ability to read and fully understand pneumatic diagrams.
• Thorough understanding of the interactions between safety equipment in
particular.
• Understanding the function and design of pneumatic components.
Bosch Rexroth offers training support for specialized fi elds.
You can fi nd an overview of the training content online at:
https://www.boschrexroth.com/de/de/academy
2.5 General safety instructions
• Observe the applicable accident prevention and environmental protection
regulations.
• Observe the safety rules and regulations of the country in which the product is
being used.
• Only use Rexroth products that are in proper working order.
• Heed all the notices on the product.
• Persons who assemble, operate, disassemble or maintain Rexroth products
should not be under the infl uence of alcohol, drugs or medication that may affect
their ability to respond.
• Use only original accessories and spare parts from Rexroth in order to prevent
hazards to people due to unsuitable spare parts.
• Observe the technical data and ambient conditions specifi ed in the product
documentation.
• If unsuitable products are installed or used in safety-relevant applications,
unexpected operating conditions may occur in the application that could result
in injury or property damage. Products should only be used in safety-relevant
applications that are expressly specifi ed and approved in the product
documentation, such as in explosion protection areas or in safety-related parts of
a controller (functional safety).
• Only start up the product if it has been determined that the end product
(for example, a machine or system) into which the Rexroth products
have been installed complies with national provisions, safety regulations and
application standards.
3 842 358 737/2022-08, MIT: SE 2/C-..., SE 2/R-..., Bosch Rexroth AG
Safety instructions
11/108
Advertisement
Table of Contents
