Dismantling And Fitting, General; Introduction - ABB HT592670 Operation Manual

Operation Manual / 4 Product description / A150-M56/66/57/67 -
A155-M..
8 Dismantling and fitting, general / 8.1 Introduction
8

Dismantling and fitting, general

8.1

Introduction

WARNING
Cutting injuries when working on the turbocharger
Some parts on the turbocharger may have sharp edges. There is a risk of a
cutting injury.
Wear safety gloves against mechanical risks when conducting assembly
u
and disassembly work.
Wear safety gloves to protect against mechanical hazards.
WARNING
Danger of burns
Touching hot surfaces can cause severe burns.
Do not touch hot surfaces.
u
Wear heat-resistant safety gloves.
u
Clearly designate hot parts and assemblies when leaving the workplace.
u
Wear safety gloves to protect against thermal hazards.
CAUTION
Further operations
This Operation Manual may be used to carry out only those operations that
are described in it. Further operations that are executed in an incorrect way
can lead to serious damage to the machine.
ABB Turbo Systems recommends having further operations carried out
u
only by trained personnel from an ABB Turbocharging Service Station.
Mark the casing position for assembly.
u
© Copyright 2019 ABB. All rights reserved. HZTL4032_EN Rev.N October 2019