Table of Contents
Advertisement
Quick Links
INSTRUCTIONS
COMPACT VHS CAMCORDER
GR-AXM250
Dear Customer,
Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read
"PRECAUTIONS" (
Automatic Demonstration takes place when "DEMO MODE" is set to "ON"
(factory-preset).
• Available when the Power Switch
located on the switch.
• Performing any operation during the demonstration stops the demonstration temporarily. If no operation
is performed for more than 1 minute after that, the demonstration will resume.
• "DEMO MODE" remains "ON" even if the camcorder power is turned off.
• To cancel Automatic Demonstration, set the Power Switch
while the demo is in progress. This takes you directly to the demo mode's Setting Menu (so you will not
have to go through the main Menu Screen). Rotate the MENU Wheel
NOTES:
• When a tape whose Erase Protection tab is in the position that allows recording is loaded in the
camcorder, demonstration is not available.
• If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration
activated on the LCD monitor or viewfinder.
pg. 3, 4) to ensure safe use of this product.
AUTOMATIC DEMONSTRATION
!
is set to "
ENGLISH
COPYRIGHT© 2002 VICTOR COMPANY OF JAPAN, LTD
" or "
" while pressing down the Lock Button
!
to "
" and press the MENU Wheel
1
Printed in Malaysia
UC
1102-DY-YL-PJ
1
to select "OFF" and press it.
LYT1077-001A
0
1
in
Advertisement
Table of Contents
Related Manuals for JVC GR-AXM250UC
Summary of Contents for JVC GR-AXM250UC
-
Page 1: Demonstration Mode
COMPACT VHS CAMCORDER GR-AXM250 Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read “PRECAUTIONS” ( pg. 3, 4) to ensure safe use of this product. Automatic Demonstration takes place when “DEMO MODE” is set to “ON”... -
Page 2: Provided Accessories
PROVIDED ACCESSORIES • AC Adapter • Cassette Adapter • Battery Pack AP-V13U or AP-V11U C-P7U BN-V11U • AA (R6) Battery • Shoulder Strap • Lens Cap (for Cassette Adapter) NOTE: In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. -
Page 3: Safety Precautions
However, live recording and LCD monitor/viewfinder playback are possible any- where. • Use the JVC BN-V11U/V12U/V20U/V400U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter. -
Page 4: Important Safety Instructions
Please call 1-800-8-BATTERY™ for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. JVC’s involvement in this program is part of our commitment to preserving our environment and conserving our natural resources. -
Page 5: Table Of Contents
AC Adapter ... pg. 6 Animation Recording ... pg. 21 Auto Date Record ... pg. 20 Auto Focus ... pg. 12 Auto Shut Off ... pg. 11 Backlight Compensation ... pg. 12 Battery Pack ... pg. 6, 26 Blue Filter Effect ... pg. 24 Brighten The Image ... -
Page 6: Ac Adapter
GETTING STARTED Hook on. BATTERY RELEASE Switch Battery pack AC Adapter To AC outlet CHARGING THE BATTERY PACK 1) Hook the end of the battery pack to the camcorder and push the battery in until it locks in place. • If the battery pack is attached in the wrong position, a malfunction may occur. -
Page 7: Date/Time Settings
DISP. ( • The date/time cannot be stored in memory if the built-in clock battery runs out. Consult an author- ised JVC dealer for replacement, or set the date/ time as necessary before you start shooting. ” or “ ”. -
Page 8: Diopter Adjustment
Grip Adjustment 1) Separate the Velcro strip. 2) Pass your right hand through the loop and grasp the grip. 3) Adjust so that your thumb and fingers can easily operate the Recording Start/Stop Button Power Zoom Lever . Refasten the Velcro strip. Viewfinder Adjustment 1) Set the Power Switch to “... - Page 9 CONTROLS, CONNECTORS AND INDICATORS Eyepiece Viewfinder Speaker 180° Video light During Recording TW I CONGRATULATIONS 25. 12. 02 BRIGHT – – – – Refer to this diagram while reading the instructions. During shooting Keep the lens cap attached to the camcorder. Cassette holder 90°...
- Page 10 • MENU Wheel [–, +] ... • BRIGHT Wheel [–, +] ... • Speaker Volume Control [VOL.] ... • TRACKING Wheel [–, +] ... 5-Second Recording Button [5 SEC. REC] ... Power Zoom Lever [T/W] ... • Manual Focus Button [ FOCUS] ...
-
Page 11: Auto Shut Off
RECORDING Set REC MODE, TAPE LENGTH and DATE/TIME in SYSTEM MENU. pg. 18 – 22, “MENU SETTINGS”) Remove the lens cap. Set the Power Switch to “ ” or “ ” while pressing down the Lock Button located on the switch. Shooting while using the viewfinder: Make sure the LCD monitor is closed and locked. -
Page 12: Auto Focus
BASIC FEATURES 5Sec. Rec (5-sec. Recording) To record a scene for 5 seconds, providing quick scene transitions like those seen in TV programmes. 1) Make sure the recording mode is set to “SP”. 2) During Record–Standby, press 5SEC. REC appears and 5Sec. Rec is reserved. 3) Press the Recording Start/Stop Button Recording starts, and after 5-second recording is finished, the camcorder re-enters the Record–... -
Page 13: Quick Review
• Do not use near flammable or explosive materi- als. • It is recommended that you consult your nearest JVC dealer for replacing the video light. Zooming To produce the zoom in/out effect. Digital circuitry extends the maximum magnification offered by optical zoom. -
Page 14: Counter Memory
Auto Tracking mode and “AT” appears. • Manual Tracking may not work with tapes recorded on other VCRs or camcorders. TBC (Time Base Corrector) Removes jitter from fluctuating video signals to deliver a stable picture even with old tapes. -
Page 15: Connection To A Vcr/Tv
Connections To A TV/VCR 1) Make sure all units are turned off. 2) Connect the camcorder to a TV or VCR using optional video and audio cables. If using both TV and VCR, connect the VCR output to the TV input. -
Page 16: Cassette Adapter
Using The Cassette Adapter Use this to play back a VHS-C video cassette recorded with this camcorder on a VHS VCR. 1) Slide the battery cover up to remove it, install one “AA (R6)” size battery, then reattach the cover. 2) Slide the latch to open the compartment door, then insert the cassette and close the compart- ment door. - Page 17 INSTRUCTIONS Eyepiece Viewfinder Speaker 180° Video light During Recording TW I CONGRATULATIONS 25. 12. 02 BRIGHT – – – – Refer to this diagram while reading the instructions. During shooting Keep the lens cap attached to the camcorder. Cassette holder 90°...
-
Page 18: Brighten The Image
MENU SETTINGS Set the Power Switch to “ down the Lock Button located on the switch. Press the MENU Wheel Screen appears. Rotate the MENU Wheel select the desired function. • To go from CAMERA MENU to SYSTEM MENU, rotate the MENU Wheel to select “... -
Page 19: Instant Titles
M.W.B. If the white balance is correct, all other colours will be accurately reproduced. AUTO : White balance is adjusted automatically. FINE : Outdoors on a sunny day. CLOUD : Outdoors on a cloudy day. HALOGEN : A video light or similar type of lighting is used. -
Page 20: Auto Date Record
SYSTEM MENU This Menu Screen cannot be accessed while recording. REC MODE Allows you to set the recording mode. “EP” (Extended Play) is more economical, providing three times the recording time. • If the recording mode is switched during record- ing, the playback picture will be blurred at the switching point. -
Page 21: Animation Recording
OSD OUTPUT ON: On-screen indications are displayed. OFF: On-screen indications are turned off except Date/Time, Instant Title and Warning Indication. REC TIME You can shoot a series of pictures, each slightly different, of the same object for a brief selected period of time (Animation). - Page 22 DEMO MODE Demonstrates certain functions automatically. Available when the Power Switch or “ ” and “DEMO MODE” is set to “ON” (factory- preset). Performing any operation during the demonstration stops the demonstration temporar- ily. Set to OFF to stop completely. •...
-
Page 23: Fade-In/Out
ADVANCED FEATURES Fade/Wipe Effects Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end. 1) Set the Power Switch to “ down the Lock Button located on the switch. 2) Press FADE/WIPE repeatedly until the desired mode appears. -
Page 24: Blue Filter Effect
Programme AE With Special Effects 1) Set the Power Switch to “ down the Lock Button located on the switch. 2) Press P.AE repeatedly until the desired mode appears. • To cancel the effect, press P.AE until “OFF” appears. • Only one mode can be engaged at a time. •... -
Page 25: Troubleshooting
Before consulting your JVC dealer, please check the following to see if you can correct the problem yourself. Vertical white lines appear when shooting a very bright object. • This sometimes occurs when the contrast between the back-ground and the object is great. It is not a defect of the camcorder. - Page 26 • When operating, keep a distance of about 30 cm (11-13/16") between the video light and people or object. • Do not use near flammable or explosive materials. • It is recommended that you consult your nearest JVC dealer for replacing the video light. General Battery Precautions If the cassette adapter is not functioning even if it is being operated correctly, the batteries are exhausted.
-
Page 27: Clean The Camcorder
Serious malfunctioning If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer. For Your Maintenance 1. After Use Set the Power Switch to “OFF” to turn off the camcorder. -
Page 28: Specifications
• Compact VHS ( • Active Carrying Bag CB-V7U • A/V (Audio/Video) Cable Some accessories are not available in some areas. Please consult your nearest JVC dealer for details on accessories and their availability. : Electronic viewfinder with 0.5" black/white CRT : Auto/Manual adjustment : 2.5"...