Fault Messages - Miele PRI 210 Operating Instructions Manual

Notes

Fault messages

When a fault occurs, ironing is interrupted, the  button flashes and a four-digit code ap-
pears in the display. Pressing the flashing  button acknowledges the fault (the fault is
stored in the fault memory). The  button flashes and the ironing process can be restar-
ted.
Fault message Fault
 
 
 
  Heater fault
 
 
 
 
 
 
 
Electronic module fault
 
 
 
 
 
Drive fault
 
 
Fan fault
  Electronic module fault
  Appliance blocked
 
Drive voltage too low
 
General compressor fault
  Low voltage
 – Control system fault
If the fault message appears again, repeat the process or switch the ironer off before
switching it back on again. If the fault persists, call the Miele Customer Service Depart-
ment.
In the event of malfunctions, please alert the Miele Customer Service Department.
32