Installing The Turbocharger; Fig. 9: Turbocharger Suspension Points - ABB HT575363 Operation Manual

Table of Contents

Advertisement

Operation Manual / 4 Product description / A100-M axial
2 Removal and installation / 2.3 Installing the turbocharger
2.3

Installing the turbocharger

2.3.1
Steps for fastening the turbocharger with clamping nuts
WARNING
Risk of tipping
If the turbocharger is not sufficiently supported or not supported at all dur-
ing removal and installation, it may tip over and cause severe injury to per-
sonnel or accidents resulting in fatalities.
Support the turbocharger at a suitable location.
u
Secure with lifting gear wherever possible.
u
Wear safety helmet.
Fig. 9: Turbocharger suspension points
If present: Remove insulation segment on the bearing casing.
u
Attach lifting gear to the suspension lug of the bearing casing and the turbine-end foot.
u
Remove the covers from the oil connections.
u
Align turbocharger and place on bracket.
u
© Copyright 2017 ABB. All rights reserved.
HZTL4033_DE
Revision B
December 2017

Advertisement

Table of Contents
loading

This manual is also suitable for:

A175-m62

Table of Contents