Advertisement
(用戶指南中範例)
注意符號
表示危險程度的用語
↓
↓
CAUTION
注意高溫。
本產品關閉電源後，內置硬碟等內部設備仍然處於高溫狀態。請在充分冷卻之後
進行拆裝。
-------------------------------------------------------------------------------------------------------------------------
------
↑ 危險提示內容
↑ 禁止行為的提示符號（有可能沒有此類提示）
本書及警告標籤中使用的符號
注意
表示有觸電的危險。
表示有因高溫而負傷的危險。
表示有手指等被夾住的危險。
表示有冒煙或者著火的危險。
禁止行為
表示非特定的一般禁止。
不要觸摸指定區域。 有觸電或著火的危險。
不要用濕手觸摸。有觸電的危險。
強制行為
請將本設備的電源插頭從伺服器上拔下。有發生火災和觸電的危險。
對非特定的一般使用者的行為進行指示。請按照說明進行操作。
注意：
本產品通過多餘的硬體模組提供硬體容錯性能。但是這並不表示能夠保證完全容錯。
如，在以下情況下可能發生宕機：
–
軟體發生致命故障。
–
多餘硬體雙方均發生故障，不能運行。
–
時鐘產生器線路或內部連接背板等非多餘元件發生致命故障。
–
切斷了整個系統的 AC 電源
本書は再生紙を利用しています This guide is made from recycled paper.
Precautions for Safety
This section provides precautions for using this product safely. Read this section
carefully to ensure proper and safe use of the server. For symbol meanings, see
"Safety Indications"
General Precautions
Do not use the product for services where critical high availability
may directly affect human lives.
The product is not intended to be used with or control facilities or devices concerning
human lives, including medical devices, nuclear facilities and devices, aeronautics
and space devices, transportation facilities and devices; and facilities and devices
表示非特定的一般的提醒警告。
requiring high reliability. NEC assumes no liability for any accident resulting in
personal injury, death, or property damage if the product has been used in the
表示有因雷射導致失明的危險。
above conditions.
Do not continue to use the equipment if you detect smoke, odor,
or noise
表示有爆炸的危險。
If the equipment emits smoke, odor, or noise, immediately unplug the power cord of
Blade Enclosure. Then, contact your service representative. Continuing to use the
表示有受傷的危險。
product in such condition may cause a fire.
Do not insert a wire or metal object
Do not insert a wire or metal object into this product.
遠離火源。有著火的危險。
There is a risk of an electric shock.
遠離液體。如果沾到液體，有觸電或著
Avoid direct look into the laser beam.
火的危險。
The N8104-123A 10GBASE-SR Adapter is classified as a Class 1 Laser Product. A
請不要對本設備進行拆卸、修理、改造。
class 1 laser will not be harmful to the human body. However, do not look directly
有觸電和發生火災的危險。
into the LAN port during operation. Keep any vacant LC connector covered with a
dust cover (rubber cap) when you do not use it or you transport it.
Keep water or foreign matter away from the equipment.
Do not let any form of liquid (water etc.) or foreign matter (e.g., pins or paper clips)
enter the equipment. Failure to follow this warning may cause an electric shock, a
fire, or a failure of the equipment. When such things accidentally enter the
equipment, immediately turn off the power of Blade Enclosure and unplug the power
cord. Then, contact your service representative.
Precautions for Installation, Relocation, Storage and Connection
Precaution on disposing or transferring
Precautions for Cleaning and Handling of Internal Devices
- 4 -
Do not use any unauthorized interface cable.
Use only interface cables authorized by NEC and locate a proper device and
connector before connecting a cable. Using an authorized cable or connecting a
cable to an improper destination may cause a short circuit, resulting in a fire.
Also, observe the following notes on using and connecting an interface cable.
Do not use any damaged cable connector.
Do not step on the cable.
Do not put any object on the cable.
Do not use the card with the loose interface cable connection.
Do not use any damaged cable.
Do not use the equipment in the place where corrosive gases
exist.
Make sure not to locate or use the equipment in the place where corrosive gases
(sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine, ammonia, ozone, etc)
exist.
Also, do not set it in the environment where the air (or dust) includes components
accelerating corrosion (ex. sulfur, sodium chloride) or conductive metals.
There is a risk of a fire due to corrosion and shorts of an internal printed board.
Contact your service representative for the place appropriate to the equipment.
Follow the ordinances by your local government when you are disposing
the product. Contact the local government for more information.
If you are transferring this product to other people, be sure to transfer all
items that come with the product including this guide along with the
product.
Do not disassemble, repair, or modify the product yourself
Do not disassemble, repair, or modify this product. Doing so may cause an
electrical shock or a fire. Do not put the product close to fire, or immerse it in
water. Doing so may cause an explosion. If the product does not function
normally, contact your service representative.
Unplug the power
Turn off and unplug the power before removing the computer's cover. Failure to
do so could endanger you and may damage the adapter or computer
*856-127021-123- BN*
Advertisement
