Timer Recording On Hdd/Dvd Deck; Vcr Plus+ C ® Timer Programming - JVC DR-MX1SEF Instructions Manual

3
VCR Plus+ C
®
You can program this unit to timer-record as many as
32 programs.
With the VCR Plus+ system, timer programming is greatly
simplified because each TV program has a corresponding code
number which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
Make sure that the unit's built-in clock is set properly.
Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
0 – 9
1
Load a recordable disc if recording to DVD.
2
Press PROGRAM to access the program top screen.
3
Press rtw e to select "VCR Plus+ PR.", then press ENTER.
When "PROGRAM FULL DELETE UNWANTED TIMER
PROGRAMS" appears on the TV screen, you need to cancel some of
the reserved programs. (
4
Press the number keys to
enter the VCR Plus+ number of a
program you wish to record.
OR
Press rtw e to select the
desired number key on the
screen, then press ENTER.
Repeat to enter all required
numbers.
If you have made a mistake, press rtw e to select "DELETE" or
"DELETE ALL', then press ENTER and input the correct number
before you press ENTER again.
5
Press rt to select "RECORD TO", then press ENTER. Press
rt to select the desired recording deck, then press ENTER.
6
Press rtw e to select "CONFIRM", then press ENTER.
If the number you entered is invalid, "PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY" appears on the TV
screen. Input a valid PlusCode number.
If "GUIDE PROGRAM IS NOT SET SET GUIDE PROGRAM THEN
RETRY" appears on the TV screen, set Guide Channel Numbers
manually. ( pg. 86)
Timer Programming
CABLE/DBS
TV DVD
PROGRAM
ENTER
RETURN
pg. 58)
1 1
3 3 PROGRAM > VCR PLUS+ (1/2)
2 2
2
PLUS CODE NO.
1 2 3 4
1
SELECT WITH [ ]
THEN PRESS [ENTER] 4
7
PRESS [PROGRAM]
TO EXIT
DELETE
RECORD TO
PROGRAM ENTER
EXIT SELECT
7
The PlusCode number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
program data.
To cancel this setting, press RETURN.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see "Changing VCR Plus+
set the Guide Channel number correctly.
8
Press rt to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
"INPUT TITLE" (
"CATEGORY" (
"WEEKLY/DAILY" (
"REC MODE" (
9
Press rt to select "OK", then press ENTER to access the
Program Confirmation screen.
10
Press w e to select "EXIT", then press ENTER to complete
timer programming.
To program another timer, press w e to select "CONTINUE", then
press ENTER.
If "PROGRAM OVERLAPPED" appears on the TV screen, see
page 58.
NOTES:
There may be cases that the VCR Plus+ Timer Programming
function prolongs the stop time of the programming.
When two successive programs are recorded on a DVD-RW disc
with the VCR Plus+ Timer Programming function, the beginning of
the second one may be left off the recording.
If the copy limited program is received during timer-recording, the unit
enters Record Pause mode. Recording starts again if it is switched to
a recordable broadcast during the time you programmed.
IMPORTANT:
If you have moved to a different area or if a broadcasting station's
channel number has been changed, the wrong channel number will
be displayed on the VCR Plus+ program screen in step 7. When this
happens, set the correct Guide Channel number for that station.
( pg. 86, "Changing VCR Plus+
Cable Box and DBS Receiver Users
To timer-record a satellite broadcast using the VCR Plus+
system:
A Perform "Cable Box and/or DBS Receiver Control Setting
(HDD & DVD Deck only)" (
B Perform "VCR Plus+ C
C Leave the cable box or DBS receiver's power on.
2 3
5 6
8 9
0
DELETE ALL
DVD
CONFIRM

TIMER RECORDING ON HDD/DVD DECK

®
pg. 64, "Modify Title Name")
pg. 65, "Modify Category")
pg. 56, "Weekly/Daily Recording")
pg. 41, "Recording Mode")
®
Setting")
pg. 24).
3
® Timer Programming" (
55
EN
Setting" ( pg. 86) and
pg. 55).