Connecting Other Equipment - JVC UX-P55 Instruction Manual

To remove the speaker grilles
The speaker grilles are removed as the illustrations below.
Holes
To remove the speaker grille, inserting your fingers at the
top of the speaker grille, pull towards you. Then pull the
bottom towards you.
To attach the speaker grille, put the projections of the
speaker grille into the holes of the speaker.

Connecting Other Equipment

You can connect both of the analog and digital equipment.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect audio equipment
Be sure that the plugs of the audio cords are colored: White
plugs and jacks are for left audio signals, and red ones for
right audio signals.
To audio output
To audio input
By using audio cords (not supplied), connect:
• Between the audio input jacks on the other equipment and
AUX OUT jacks: For recording on the other equipment.
• Between the audio output jacks on the other equipment and
AUX IN jacks: For playing the other equipment.
To connect audio equipment with an optical digital
input terminal
You can record CD sound onto the connected digital
Projections
equipment.
Speaker grille
Connect an optical digital cord (not supplied) between the
optical digital input terminal on the other equipment and the
OPTICAL DIGITAL OUT terminal.
Now, you can plug the AC power cord.
OUT
AUX
R L
IN
Audio equipment
– 8 –
OPTICAL
DIGITAL
OUT
Before connecting the other
equipment, remove the protective
plug from the terminal.
To optical digital input
IMPORTANT: Be sure to check all connections to be done
before plugging the AC power cord into a wall outlet.
Protective plug
Audio equipment with
an optical digital input