Cleaning And Maintenance - Beko STM 6120 W User Manual

3 Cleaning and maintenance

3.1 Cleaning and care
• Never use gasoline, solvent and abrasive cleaning agents or hard brush
to clean this appliance.
• Do not put the garment steamer in water or any other liquid.
• Do not drop, throw or try to bend the steamer.
• Do not attempt to disassemble the appliance.
A • The garment steamer is designed for household use only and to be used
with normal tap water. Do not put perfume, vinegar or other chemicals
in the tank. The appliance is not designed to work with these chemicals.
• Always empty the water tank after each use and rinse with clean water.
• Wipe outer surfaces with a damp cloth.
• Avoid operating the appliance in humid or moist places.
• Do not locate the appliance near a heat source or direct sunlight.
• Always ensure the steam outlet hole is clean and free from scaling and
not blocked.
C
This garment steamer is designed to use normal tap water.
• The steam brush has a special anti calc function.
• The steam brush has a small opening plastic part on the bottom side
C
of the water tank.
• This one is able to collect the lime ions in the water and this way it
reduces the water hardness.
• This reduces the formation of lime deposits. It is not necessary to remove
or clean this plastic part.
For commissioning, general use and cleaning, please observe the instructions
on pages 5-6 of this operating manual.
16 / EN
Garment Steamer / User Manual