Pip / Pop Menu; Input/Output Configuration Menu - Sony LMD-XH550MT Instructions For Use Manual

Menu Setting
3D Signal Format Select the 3D signal format.
 Single Cable DS:
Select to display signals of the 3G
Level-B Dual Stream system in 3D.
Use a single SDI cable.
 Dual Cable DS:
Select to display signals of the Dual
Stream system in 3D.
Input signals to the 12G-SDI 1/2
connectors by using two SDI cables.
 Side by Side:
Select to display signals of the Side
by Side system in 3D.
 Top & Bottom:
Select to display signals of the Top
& Bottom system in 3D.
 Line by Line:
Select to display signals of the Line
by Line system in 3D.
 Auto:
Switches automatically among
displays of 2D or 3D according to
the channel assign information
when 3G-SDI signals of the 3G
Level-B system are input.
When "2D/3D Select" is set to "2D,"
images are always displayed in 2D.
Note
For the Interlace and YUV420 signals,
"Line by Line" is not available.
3D Disparity Sets the setting of the 3D Disparity
adjustment.
L/R Priority Sets the channel displayed in the top
of the screen of an effective display.
Select "L Line First" or "R Line First."
Note
When the setting is wrong, the screens
for left eye and right eye are displayed
conversely.

PIP / POP menu

The PIP / POP menu is used to set the display
mode for the 2 or 3 screens display and for each
input.
Note
3D is not available for the sub display.
Menu Setting
3 Screen Display
Port C Display Sets the display of the sub screen for
the third screen.
Select "On" or "Off."
Menu
Port C Input
Clipping Size
Sub Screen Position
PIP
POP
Pattern Skip

Input/Output Configuration menu

Menu
Clone Out
Format
Frame Rate
30
Setting
Sets the input connector for the third
screen.
Select from among "12G-SDI 1," "12G-
SDI 2," "3G-SDI," "Display Port,"
"HDMI," "DVI-D."
Notes
 When inputting the 4K equivalent
signal to the main or sub screen,
the screen is not displayed even
though the 4K equivalent signal is
input to the third screen.
 When the main screen displays in
"3D" or "3D to 2D Convert" for "2D/
3D Select," the third screen is not
displayed even though "Port C
Display" is set to "On."
The clipping size can be set when
using 2 or 3 screen-display.
 HD signal:
Select from "Normal," "4:3," "5:4,"
or "V Full."
 4K equivalent signal:
Select from "Normal" or "V Full."
Note
"V Full" is applied to the main/sub
screen of POP1 for 2 screen-display
and to the main screen of POP1 for 3
screen-display.
Sets the sub screen position for the 2
or 3 screens display (PIP).
Sets the sub screen position for the 2
or 3 screens display (POP).
Sets the pattern that is skipped when
changing the displaying pattern by
pressing the PIP/POP button on the
front panel or the Foot Switch while
displaying 2 or 3 screen displays.
Set to "Not Skip" or "Skip" for the PIP1,
PIP2, POP1, or POP2 pattern.
Setting
Select the signal format for clone out
(SDI signal) from "3840×2160" or
"1920×1080."
Select the frame rate for clone out (SDI
signal) from "60Hz" or "50Hz."
When "60Hz" is selected, clone out
(SDI signal) is output at 59.94 Hz.