Connection Of External Equipment - LG DI28Z12 Owner's Manual

Connection of external equipment

You can connect additional equipment, such as VCRs, camcorders
etc. to your set. Here shown may be somewhat different from the
back of your set. Also see page 35.
Aerial socket
1. Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
2. Connect the aerial cable to the RF aerial in socket of the VCR.
3. Store the VCR channel on a desired programme number using
the 'Manual programme' section.
4. Select the programme number where the VCR channel is
stored.
5. Press the PLAY button on the VCR.
Euro SCART socket (AV1)
1. Connect the euro SCART socket of the VCR to the euro
SCART socket 1 on the back of the set.
2. Select the AV1 mode for the socket 1 by pressing the TV/AV
button repeatedly.
3. Press the PLAY button on the VCR to play the VCR or the
REC button to record a viewing TV programme.
Note :
a. You can change the names for AV modes. In AV mode press
the MENU button then the RED button. To change the name,
refer to step 8 on page 12.
b. Signal type RGB, i.e. the signals red, green and blue can only
be selected for the euro scart socket 1(not SKY OUT euro
scart). These signals are transmitted, for example, by a
computer, pay TV decoder, game machine or Photo CD unit.
c. To record the digital satellite broadcast, connect the VCR to
the SKY OUT euro scart socket.
Audio/Video in sockets (AV2)
1. Connect the audio/video out sockets of the VCR to the
AUDIO/VIDEO IN (AV2) sockets on the front panel of the set.
2. Select the AV2 mode by pressing the TV/AV button repeatedly.
3. Press the PLAY button on the VCR.
S-Video/Audio in sockets (S-AV)
When connecting an S-Video VCR to the S-VIDEO socket, the
picture quality will be further improved.
1. Connect the S-video socket of the VCR to the S-VIDEO socket
on the front panel of the set.
2. Connect the audio cable from the S-Video VCR to the AUDIO
IN sockets on the front panel of the set.
3. Select the S-AV mode by pressing the TV/AV button
repeatedly.
4. Press the PLAY button on the VCR.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket on the front panel of the set.
L
75Ω
L
R
AUDIO OUT
VCR
L
75Ω
L
R
AUDIO OUT
VCR
TV/AV ARC MENU
SKY
BACK UP
AV 2
RACTIVE CARD
S-VIDEO
VIDEO AUDIO
TV GUIDE
VIEWING CARD
L/MONO R
VCR
TV/AV ARC MENU
SKY
BACK UP
AV 2
RACTIVE CARD
S-VIDEO
VIDEO AUDIO
TV GUIDE
VIEWING CARD
L/MONO R
S-VIDEO VCR
SKY OUT
1
SKY OUT
1
OK
select
OK
select
23