Advertisement
Step One
Download Logitech Options to use all the possibilities this mouse has to offer. To download and learn more about the possibilities go to logitech.com/options.
Step Two
Turn your mouse on.
Step Three
This mouse allows you to use it with up to three different computers. Just use the Easy Switch™ button to change the channel. Select the channel you want and go to the next step.
Step Four
To connect your mouse to your computer press the Easy-Switch™ button for 3 seconds. When it blinks fast it means it's in discoverable mode.
Step Five
Choose if you want to pair with Bluetooth or with the provided Unifying receiver.
1 – Speed-adaptive scroll wheel
2 – Manual shift button
3 – Gesture button
4 – Micro USB port
5 – On/Off button
6 – Darkfield high precision sensor
7 – Easy-Switch & connect button
8 – Battery status LED
9 – Thumb wheel
10 – Back/forward buttons
If SmartShift™ is enabled, the speed-adaptive scroll wheel shifts between two scrolling modes automatically, in response to your touch.
Select Enable from the SmartShift pull-down menu on the Point and scroll tab.
Turn off SmartShift by selecting Disable from the SmartShift pull-down menu.
When SmartShift is disabled, spinning or braking the scroll wheel has no effect on the current scrolling mode.
Whether SmartShift is enabled or disabled, you can manually switch between modes by pressing the mode shift button.
By default, mode shift is assigned to the button on top of the mouse. (Check current button assignments on the Mouse tab.)
If you prefer to use just one mode, you can fix the scroll wheel to either click-to-click (ratchet) or hyper-fast (freespin) mode.
On the Point and scroll tab, select Ratchet or Freespin from the Fixed scroll wheel mode pulldown menu.
IMPORTANT!
You can fix the scroll wheel mode only if SmartShift is disabled and mode shift is not assigned to any MX Master button.
To activate fixed scroll wheel mode:
For more help, see the MX Master 2S FAQ page
Scroll side to side effortlessly with a stroke of your thumb.
To scroll horizontally:
Install Logitech Options software to extend thumb wheel capabilities:
GESTURES STREAMLINE NAVIGATION AND DESKTOP MANAGEMENT
Install Logitech Options software to enable gestures for managing media, panning, zoom, and rotation, plus custom tasks.
Assign up to five different actions to the Gesture button. Or map gestures to other MX Master buttons, including the middle button or manual shift button.
To perform a gesture:
The figure below shows the gestures for managing windows in Windows 8 and in Mac OS X.
Conveniently located at your thumb, the back and forward buttons enhance navigation and simplify tasks.
To move back and forward:
NOTE: On the Mac, enabling of the back/forward buttons requires installation of Logitech Options software.
Install Logitech Options software to unlock new capabilities for the back/forward buttons
In addition to enabling the buttons for use with Macs, Logitech Options software lets you map other useful functions to the buttons, including OS navigation, zoom, dictionary lookup, and more.
1 – Charging cable
A minimum of 3 minutes charging gives you enough power for a full day of use. Depending on how you use the mouse, a full charge can last up to 70 days*.
* Based on eight hours of daily use. Battery life may vary depending on user and operating conditions.
Three LED lights on the side of the mouse indicate battery status.
Install Logitech Options software to receive battery status notifications, including low-charge warnings.
LEDs Lit | Color | Indications |
3 | Green | 100% Charge |
2 | Green | 66% Charge |
1 | Green | 33% Charge |
1 | Red | 10% Charge Recharge now! |
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the MX Master 2S that isn't answered in the manual? Leave your question here.