Engine Switch (Vehicle With Keyless Push Start System) - Suzuki IGNIS 2022 Series Manual

OPERATING YOUR VEHICLE
WARNING
(Continued)
• Always return the ignition switch to
"LOCK" position and remove the
ignition key when leaving the vehi-
cle even only for a short time. Also
do not leave children alone in a
parked vehicle. Unattended chil-
dren could cause accidental move-
ment of the vehicle or could tamper
with power windows or power sun-
roof. They also could suffer from
heat stroke in warm or hot weather.
These could result in severe injury
or even death.
NOTICE
Do not leave the ignition switch in
"ON" position if the engine is not run-
ning as the lead-acid battery will dis-
charge.
3-5
Engine switch (vehicle with
keyless push start system)
EXAMPLE
LOCK (OFF)
This mode is for parking the vehicle. When
this mode is selected by pressing the
engine switch and then any door (including
the tailgate) is opened or closed, the steer-
ing will be locked automatically.
ACC
Press the engine switch to select this igni-
tion mode to use such electric equipment
as the audio system, outside rearview mir-
rors and accessory socket with the engine
off. When this position is selected, the
information display in the instrument clus-
ter shows the following message: "ACC"
IGNITION SWITCH POSITION. Refer to
"Information display" in the "BEFORE
DRIVING" section for details.
ON
• With the engine off
You can use such electric equipment as
the power windows and wipers with the
engine off. When this ignition mode is
selected by pressing the engine switch,
the information display in the instrument
cluster shows the following message:
"ON" IGNITION SWITCH POSITION.
• With the engine on
All electric equipment is operational. The
vehicle can be driven when you have
selected this ignition mode by pressing
the engine switch.
START
75RM230
Manual transmission – Provided you have
the keyless push start system remote con-
troller with you, the engine automatically
starts when you press the engine switch to
select this ignition mode after shifting to
"N" (Neutral) and depressing the brake and
clutch pedals.
CVT – Provided you have the keyless
push start system remote controller with
you, the engine automatically starts when
you press the engine switch to select this
ignition mode after placing the gearshift
lever in the "P" position and depressing the
brake pedal. (If you need to re-start the
engine while the vehicle is moving, shift
into "N".)