Advertisement
1. Install the front base and back base to a whole unit.
2. Penetrate the cord from the inner hole of base then install the base to the bottom spindle of
the product.
3. Insert two pcs butterfly screw from the corresponding hole and rotate it in place. Then the
base will be assembled to the main body successfully.
4. Put the cord to the card slot of base.
Caution:
1) Make sure to put the spindle vertically and placed tightly into the inner hole of the base.
2) The butterfly screw must be locked tightly to avoid any shaking.
Button and Display Indication
Button name:
top
LED display Indication:
remote control
4
Advertisement
