Installation In A Home - Kenwood KPA-H2H Installation Manual

Installation in a home

Note: Do not put Here Anywhere in the docking station until you have completed the installation.
2
1. Using the provided screw,
assemble the docking station
cradle to the base.
4
2A. Plug the audio cable's mini 2B. Plug the audio cable's white
connector into the back of the (L ch,) and red (R ch.) connec-
docking station, as shown. tors into your audio system.
KPA-H2H Installation Guide
Installation in a home (continued)
3. Plug the AC cord into the power supply, then plug the power supply into
the back of the docking station, as shown. Don't plug the AC cord into
a wall outlet until the installation is completed.
KPA-H2H Installation Guide
4. Plug the antenna into the back of the docking sta-
tion until it is firmly seated, as shown.
5