Disassembly- And Reassembly Advice; Disassembly - Philips 3000 Series Service Manual

Disassembly- and Reassembly advice

Disassembly

• To remove the Exhaust filter (12):
Turn the appliance upside down, push the blue
button and remove the Exhaust grill (13), now
the Exhaust filter can be removed / replaced by
a new one. (see picture)
• Remove the dustcover assy (7) using a
screwdriver (see picture).
• To remove the Top housing:
Remove the 3 screws (B). (see picture)
B
1
2
B
B
• Turn the appliance upside down and remove
the 3 screws (C) on the bottom (underneath the
Exhaust grill). (see picture)
C
• Lift the Top housing by using a screwdriver on
the backside, place it between Lower housing
and Top housing.
(Remark: buttons do not need to be removed).
• When you take off the upper housing you have
to be careful that the connector of the potmeter
is not disconnected. Remove the connection for
the potmeter then the housing can be removed.
C C C
5