DCS-8635LH
2K QHD Pan & Zoom Outdoor
Wi-Fi Camera
Quick Installation Guide
What's in the Box
2K QHD Pan & Zoom
Power Adapter
Outdoor Wi-Fi Camera
(DCS-8635LH)
Accessories
Cable Ties
Quick Installation Guide
Simple Setup
Note: Please set up your device
before mounting it.
Get the mydlink app on the App
1
Store or on Google Play. Launch the
app, then Sign In or Create a New
Account.
mydlink
Power on the device and wait for
2
the Status LED to flash orange.
Note: Make sure that your mobile device's
Bluetooth is on.
Place your device next to your
3
mobile device. A prompt will appear
- tap Add Device, then follow the
app instructions.
LED Behavior
Status LED
Connected to the network and mydlink
Booting up
Ready for setup
Firmware being updated - do not power off
Timeout for setup - please power cycle the device
Setup Code
This is a backup of your device's Setup
Code. Please keep it as future reference
for your device.
Ethernet Cable Waterproofing
Thread the Ethernet connector through the
small waterproof connector, with the inner
threads facing towards the RJ-45 connector.
Thread the Ethernet connector through the
large waterproof connector as shown.
Insert the Ethernet connector into the
Ethernet plug securely.
Insert the Ethernet plug into the large
waterproof connector, then twist the large
waterproof connector clockwise to snap it in
place.