How Do I Connect My Entré To The Internet; Finding Supported Internet Service Providers - Kenwood Sovereign Entre Install Manual

How Do I Connect My Entré to the Internet?

Finding Supported Internet Service Providers

You must have a compatible third-party Internet Service Provider (ISP) in order
to use Entré to access the Internet. Because free ISPs, AOL, and CompuServe do
not use standard methods of Internet connectivity, and do not open their
networks to outside users, you cannot use these ISPs with Entré. If you do not
currently have a supported ISP , during the setup process you will be given a
phone number to call to set up an account with a supported ISP , or you can
establish an account on your own with a supported ISP .
There are three different ways to establish a connection to the Internet:
• If you have a dialup ISP , connect the Input phone line to the phone jack
labeled "Wall" on the back of Entré.
How to Connect and Set Up Your Entré Entertainment Hub
How Do I Connect My Entré to the Internet?
You can plug a telephone into the phone jack labeled "Phone"
on the back of Entré.
Use a minimum of No. 26 AWG wire for telephone cables.
• If you have either DSL or cable modem service, you will need to purchase
an Ethernet adapter and connect Entré as shown below.
Entré supports the CATC NetMate Link (#U-ETH-NM02)
Ethernet adapter, which is available from Kenwood via the
Kenwood USA Web site at www.kenwoodusa.com. Go to the
Kenwood Shop link to purchase an adapter, or check for an
updated list of other supported adapters.
17