Table of Contents
Advertisement
5.2
Control elements
No.
Description
Handset
■
1
During a call request, pick up the handset within 30 seconds to accept the call.
■
During communication, hang up the handset to terminate the call.
Induction Loop symbol
The device is equipped with a hearing loop for coupling the audio signal into hearing aids.
■
In order to be able to use such hearing loops, the hearing aid must have a so-called
2
telephone coil (short: "T-coil") that records the magnetic alternating field of the hearing
loop.
■
The distance to the device should be a maximum of 80 cm for optimal reception.
Programmable button
The button can be programmed on the "Smart Access Point" for the functions below:
■
Intercom to same unit (default)
■
Intercom to another unit
■
3
Call guard unit
■
Open door with Outdoor station
■
Open door with IP actuator
■
Turn on the designated light
■
SOS function
Light button
■
In standby status, press the button to turn on the designated light.
4
■
In standby status, hold the button for 5 seconds to set the ringtone type.
■
During communication, hold the button for 5 seconds to set the call volume.
Call button
■
Pick up the handset in standby mode and press the button to communicate with other
indoor stations within the same apartment (default setting). In doing so, all existing indoor
stations within the apartment will be called simultaneously. In this case, the group call is
5
stopped as soon as one of the indoor stations accepts the call.
The button can be programmed on the "Smart Access Point" to Intercom to another unit or call
guard unit.
Product manual 2TMD042200D0001
6
7
5
8
4
9
3
2
1
Product description
10
│7
Advertisement
Table of Contents
