Bosch UniversalChainPole 18 Original Instructions Manual page 15

Inspect the product and replace worn or damaged parts
u
for safety.
Make sure all nuts, bolts and screws are tight to ensure
u
safe working with the product.
Store the product in a secure, dry place, out of the reach
u
of children.
Ensure replacement parts fitted are Bosch-approved.
u
Symbols
The following symbols are important for reading and under-
standing the original instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the product in a better and safer
manner.
Symbol Meaning
Movement direction
Reaction direction
Switching on
Switching off
Accessories/Spare Parts
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the safety warnings and
instructions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the ending of this operat-
ing manual.
Intended Use
The machine is intended for domestic use, for pruning trees
and shrubs at elevated height, while the user is situated on
the ground. The machine is not intended to cut inorganic ma-
terial or to be used on a ladder or steps. This tool is not in-
tended for commercial or industrial use.
Delivery Scope (see figure B)
Carefully remove the machine from its packaging and check
if the following parts are complete:
– Pruner head
Technical Data
Cordless pole pruner
Article number
Bosch Power Tools
– Telescopic handle
– Battery
a)
– Charger
– Shoulder strap
– Chain guard
– Operating instructions
– Hex key screwdriver
– Saw chain oil
a) country specific
When parts are missing or damaged, please contact your
dealer.
Product Features (see figure A)
The numbering of the product features refers to the illustra-
tion of the product on the graphics pages.
(1) Saw chain
(2) Chain bar
(3) Oil filler cap
(4) Pivoting head adjustment buttons
(5) Chain tensioning screw
(6) Connector
(7) Telescopic tube
(8) Telescopic height adjustment
(9) Front handle
(10) Front handle strap loop
(11) Shoulder strap
(12) Extended gripping area (insulated)
(13) Rear handle strap loop
(14) Locking button
(15) Rear handle (insulated gripping surface)
(16) On/Off switch
(17) Battery
(18) Battery unlocking button
(19) Hook to front handle strap loop
(20) Hook to rear handle strap loop
(21) Oil tank inlet/outlet
(22) Cover
(23) Drive sprocket
(24) Guide fin for chain bar
(25) Fixing screws
a)
(26) Charger
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
English | 15
UniversalChainPole 18
3 600 HB3 1..
F 016 L94 358 | (10.12.2021)