Operation - Kenwood RFU-6100 Instruction Manual

Wireless unit
Hide thumbs Also See for RFU-6100:
Table of Contents

Advertisement

Operation

1 Connect your Surround Speaker with the corresponding color terminals on the Wireless Receiver (RFU-R6100).
(Right: Gray, Left: Blue)
2 Connect the Wireless Receiver (RFU-R6100) power cord to your power supply.
• The Wireless Receiver (RFU-R6100) power indicator lights up green.
3 Connect the AC adapter to the Wireless Transmitter (RFU-T6100) and power supply.
4 Make sure you position both the Wireless Transmitter (RFU-T6100) and Wireless Receiver (RFU-R6100) at least 2 meters
(6.6 ft.) apart.
• The control distance of the RF signal is about 30m (100 ft.) provided there is no obstacle.
5 Connect and carefully match the colors of the wires on the Wireless Transmitter (RFU-T6100) to the corresponding sur-
round speaker terminals on your Receiver.
Wireless Transmitter
(RFU-T6100)
• The Wireless Transmitter (RFU-T6100) power indicator lights up green.
6 Check and adjust the 4-channel toggle switch on the Wireless Receiver (RFU-R6100) (CHANNEL SELECTOR switch) and
Wireless Transmitter (RFU-T6100), so that both units are using the same channel.
Wireless Receiver
(RFU-R6100)
CHANNEL SELECTOR switch
7 On your Receiver, play an audio source and activate the surround sound mode option. Adjust the volume to reproduce
surround sound in the rear speakers.
8 Extend the antenna vertically on both the Wireless Receiver (RFU-R6100) and Wireless Transmitter (RFU-T6100) to im-
prove reception. Check the antennas are safely positioned without obstruction.
To ensure quality sound production and transmission
• Place both the Wireless Receiver (RFU-R6100) and Wireless Transmitter (RFU-T6100) off the ground (recommended minimum
height of 30cm (1 ft.)).
• Avoid placing the Wireless Transmitter (RFU-T6100) too close to your Receiver, AC adapter, TV or other electrical equipment as it
may cause electrical interference.
• In case of sound distortion, please select another channel for both the Wireless Receiver (RFU-R6100) and Wireless Transmitter
(RFU-T6100). The distortion could be the result of interference caused by other equipment using same frequency channel in your
house or neighbourhood.
Wireless Receiver
(RFU-R6100)
Right (Gray
1
4
Surround
Speaker (R)
Receiver
and Black)
Left (Blue and Black)
Wireless Transmitter
(RFU-T6100)
Surround
Speaker (L)
Use the enclosed AC adaptor
(AC-150015A) for this product.
4-channel switch
5
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents