Advertisement
OPERATING INSTRUCTIONS
Remote Control
• The patio heater comes with a button cell CR2450 battery
provided in the same plastic wallet as the instruction
manual.
• To use the remote for the first time, remove the battery
cover at the back of the remote, and insert the battery with
the positive side facing up, and replace the battery cover.
Low
Button
• Press the LOW button to operate the heater on 900W.
Press the LOW button again to turn it off.
• Press the HIGH button to operate the heater on 1200W.
Press the HIGH button again to turn it off.
• Press both the LOW and HIGH buttons to operate the
heater on 2100W. Press both the LOW and HIGH buttons
again to turn off the heater.
Replacing the Battery
• To replace the battery follow the steps below:
1. Remove the battery cover at the back of the remote.
2. Use a flathead screwdriver to lift the battery up and
out of the remote.
3. Replace the button cell CR2450 battery and then
reinstall the battery cover onto the remote.
19
High
Button
Revision 1.3
Advertisement
