Magnetic Sensor (Ezu-Rv3S) - Hitachi EUP-O732T Instruction Manual

2) Detach the magnetic sensor and the Spacer for EZU-RV2S from the
Magnetic sensor attachment as shown Fig.7 in the out of
operative field.
Fig.7 How to release magnetic sensor from
Clean, disinfect and sterilize the Magnetic sensor attachment
and the Spacer for EZU-RV2S before the first use as they are
not sterilized in the factory.

4.2 Magnetic Sensor (EZU-RV3S)

Magnetic sensor (EZU-RV3S) as shown in Fig.8 is the magnetic sensor
for EUP-O732T.
Direction mark
4.2.1 How to Attach the Magnetic Sensor EZU-RV3S
The procedure of attaching Magnetic sensor is as follow.
1) Confirm that the Magnetic sensor attachment is disinfected and
sterilized.
2) Connect the probe to the ultrasound diagnostic scanner and
operate the scanner. Then adjust the image according to the
instructions given in the operation manual for the scanner.
3) To use RVS (Real-time Virtual Sonography), attach the magnetic
sensor as shown below in the out of operative field.
the Magnetic sensor attachment
Fig.8 Magnetic sensor (EZU-RV3S)
CAUTION
Magnetic Sensor
(EZU-RV3S: white)
-9- Q1E-EP1234