1 Safety Precautions 1.1. General Guidelines 1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials. 2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the wires have been broken or disconnected, do not attempt to repair or re-wire the units.
2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor [chip] components.
2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
3 Service Navigation 3.1. PCB Layout Board Name Function Board Name Function Power Supply Data Driver (Lower Right) Non serviceable Data Driver (Lower Left) P-Board should be exchange for service Scan Drive Main AV input, processing Sustain Drive Remote receiver, Power LED, C.A.T.S. sensor...
4 Specifications Power Source AC 220 - 240 V, 50 / 60 Hz (Except P) AC 110 - 240 V, 50 / 60 Hz (P) Power Power Rating 200 W (Except P) 205 W (P) Standby condition 0.4 W Display panel Aspect Ratio 16:9 Visible screen size...
Page 9
USB 1/2 USB 2.0 TYPE A Connectors DC 5 V, Max. 500 mA ETHERNET 10BASE-T / 100BASE-TX Dimensions (W × H × D) 1,023 mm × 671 mm × 288 mm (With Pedestal) 1,023 mm × 637 mm × 93 mm (TV only) Mass 26.5 kg Net (With Pedestal) 23.5 kg Net (TV only)
How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote control for more than 3 seconds. TV will be forced to the factory shipment setting after this SELF CHECK. 5.1.3. Model and Keys: Model No. Keys One-to-One WIDEVINE TH-P42X30D/G/K/M/P/S/V...
6 Service Mode 6.1. How to enter into Service Mode 6.1.1. Purpose After exchange parts, check and adjust the contents of adjustment mode. While pressing [VOLUME ( - )] button of the main unit, press [i] button of the remote control three times within 2 seconds. 6.1.2.
Page 12
6.1.4. Contents of adjustment mode • Value is shown as a hexadecimal number. • Preset value differs depending on models. • After entering the adjustment mode, take note of the value in each item before starting adjustment. Main item Sub item Sample Data Remark ADJUST...
6.2. Option - Mirror Picture can be reversed left and right or up and down. 00 : Default (Normal picture is displayed) 01 : Picture is reversed left and right. 02 : Picture is reversed up and down. Hint : If the defective symptom (e.g. Vertical bar or Horizontal bar) is moved by selection of this mirror, the possible cause is in A-board.
6.4. Hotel mode 1. Purpose Restrict a function for hotels. Item Function 2. Access command to the Hotel mode setup menu Hotel Mode Select hotel mode On/Off In order to display the Hotel mode setup menu: Initial INPUT Select input signal modes. While pressing [VOLUME (-)] button of the main unit, Set the input, when each time power is switched press [AV] button of the remote control three times within...
6.5. Data Copy by SD Card 6.5.1. Purpose (a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to SD card and then copy to new A-board. (b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to SD card and then copy to other TVs.
Page 16
6.5.3. Data copy from TV set to SD Card 1. Turn on the TV set. 2. Insert SD card with a startup file (pwd file) to SD slot. On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2770 (b) For Hotel : 4850 Data will be copied from TV set to SD card.
Page 17
6.5.4. Data copy from SD Card to TV set 1. Turn on the TV set. 2. Insert SD card with Data to SD slot. On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2771 (b) For Hotel : 4851 Data will be copied from SD card to TV set.
7 Troubleshooting Guide Use the self-check function to test the unit. 1. Checking the IIC bus lines 2. Power LED Blinking timing 7.1. Check of the IIC bus lines 7.1.1. How to access 7.1.1.1. Self-check indication only: Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control for more than 3 seconds.
7.2. Power LED Blinking timing chart 1. Subject Information of LED Flashing timing chart. 2. Contents When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit. Blinking Times Contents Check point...
8 Disassembly and Assembly Instructions 8.1. Remove the Rear cover 8.4. Remove Side terminal cover 1. See PCB Layout (Section 3) 8.2. Remove the AC inlet 1. Remove the screws (×2 2. Remove the Side terminal cover. Caution: To remove P.C.B. wait 1 minute after power was off for dis- charge from electrolysis capacitors.
8.6. Remove the A-Board 8.8. Remove the SN-Board 1. Remove the Tuner unit. (See section 8.5.) 1. Disconnect the flexible cables (SN11, SN12, SN13, SN14, SN15, SN16, SN17 and SN18) connected to the 2. Remove the screws (×2 ) and remove the A-Board. SN-Board.
8.10. Remove the Stand bracket and 8.11. Remove the C1-Board the Hanger metals 1. Remove the Hanger metal R and the Stand bracket. (See section 8.10.) 1. Remove the Plasma panel section from the servicing 2. Remove the Flexible cable holder fastening screws (×8 stand and lay on a flat surface such as a table (covered by a soft cloth) with the Plasma panel surface facing 3.
8.13. Remove the Plasma panel sec- 8.14. Remove the Glass holders tion from the Cabinet assy 1. Remove the Cabinet assy. (See section 8.13.) 2. Remove the screws (×5 1. Remove the Plasma panel fastening screws (×4 ) and 3. Remove the Glass holder top. remove the Cabinet assy.
8.16. Replace the Plasma panel Caution: A new Plasma panel itself without Hanger metals is fragile. To avoid the damage to new Plasma panel, carry a new Plasma panel taking hold of the Hanger metals after assembling the Hanger metals and the Stand bracket. 1.
9 Measurements and Adjustments 9.1. Adjustment 9.1.1. Vsus selection Caution: When Plasma panel or A-board is replaced, Vsus should be set to LOW or HIGH. Procedure 1. Go into main item [VSUS] in Service Mode. LOW or HIGH will be displayed. 2.
Page 28
9.1.2. Sub-Contrast adjustment Name of measuring instrument Connection Remarks RF generator Base Band signal generator HD signal generator Steps Remarks Connect IIC cable (bus controller-cable) after banner OSD appear. Note: And after SRQ-L, begin an adjustment 2 seconds later. Sub-contrast adjustment is unadjusted for AV/ HD input.
Page 29
Steps Remarks Another procedure Connect IIC cable (bus controller-cable) after banner OSD appear. And after SRQ-L, begin an adjustment 2 seconds later. Adjustment of HD system 1. At 1080i 100% Full White or Split colour bar receive component signal, as shown below. 2.
Page 30
9.1.3. White balance adjustment The adjusting method is different according to the PEAKS EEPROM version. [copy adjustment] : Peaks EEPROM ver.1.00- [Differential and copy adjustment] : Peaks EEPROM ver.1.01- Name of measuring instrument Connection Remarks W/ B pattern Panel surface Color analyzer (Minolta CA-100 or equivalent) Steps...
Page 31
Steps Remarks [Differential and copy adjustment] Execute adjustment for color temp. [NORMAL], and set data for color temp. [COOL], [WARM] by data shift WB of HD (or PAL) copies the adjustment data from an adjusted format side. Note: The adjustment does only color temp. [NORMAL]. A adjustment value difference from [NORMAL] is written to EEPROM as for [COOL] and [WARM] by operat- ing a [OK] key.
10 Block Diagram 10.1. Main Block Diagram DIGITAL SIGNAL PROCESSOR HDMI1-3 (HDMI2) ETHERNET DATA TMDS DATA ETHERNET LAN CON I/F ETHER PHY HDMI I/F SIF_OUT SIF I/F SD CARD DATA G/S ONLY SD CARD SD CARD I/F SLOT IFD_OUT TUNER TUNER I/F USB 1,2 USB I/F...
10.3. Block (2/4) Diagram DIGITAL SIGNAL PROCESSOR IC9300 PD5L VIDEO DATA PLASMA AI VIDEO DATA LVDS DATA H/V Sync Control VIDEO DATA Sub Filed Processor P+3.3V IC9304 P+3.3V P+3.3V SI/SO SOS8_SS FLASH I/F IIC0 SOS8_SS FLASH DATA DRIVER CONTROL P_S0 P_S1 D_UHZ IC5000...
10.4. Block (3/4) Diagram POWER SUPPLY COLD COLD AC CORD Fuse AC Vin PHOTO (Live) Detection COUPLER (Neutral) FILTER STANDBY SS11 VOLTAGE CONVERTER T101 FET SW Vsus P+15V FET SW Relay F15V for prevention of inrush current F15V STB5V Drop IC SOUND15V OCP/OVP P+15V...
11 Wiring Connection Diagram 11.1. Caution statement. Caution: Please confirm that all flexible cables are assembled correctly. Also make sure that they are locked in the connectors. Verify by giving the flexible cables a very slight pull. 11.2. Wiring (1)
Page 44
Model No. : TH-P42X30D/G/K/M/P/S/V Schematic Diagram Note...
Page 45
Model No. : TH-P42X30D/G/K/M/P/S/V Replacement Parts List Note...
Page 46
Model No. : TH-P42X30D/G/K/M/P/S/V A-Board (1/12)
Page 47
Model No. : TH-P42X30D/G/K/M/P/S/V A-Board (2/12)
Page 48
Model No. : TH-P42X30D/G/K/M/P/S/V A-Board (3/12)
Page 49
Model No. : TH-P42X30D/G/K/M/P/S/V A-Board (4/12)
Page 50
Model No. : TH-P42X30D/G/K/M/P/S/V A-Board (5/12)
Page 51
Model No. : TH-P42X30D/G/K/M/P/S/V A-Board (6/12) and K-Board...
Page 52
Model No. : TH-P42X30D/G/K/M/P/S/V A-Board (7/12)
Page 53
Model No. : TH-P42X30D/G/K/M/P/S/V A-Board (8/12) S-10...
Page 54
Model No. : TH-P42X30D/G/K/M/P/S/V A-Board (9/12) S-11...
Page 55
Model No. : TH-P42X30D/G/K/M/P/S/V A-Board (10/12) S-12...
Page 56
Model No. : TH-P42X30D/G/K/M/P/S/V A-Board (11/12) S-13...
Page 57
Model No. : TH-P42X30D/G/K/M/P/S/V A-Board (12/12) S-14...
Page 58
Model No. : TH-P42X30D/G/K/M/P/S/V C1-Board S-15...
Page 59
Model No. : TH-P42X30D/G/K/M/P/S/V C2-Board S-16...
Page 60
Model No. : TH-P42X30D/G/K/M/P/S/V SN-Board (1/6) S-17...
Page 61
Model No. : TH-P42X30D/G/K/M/P/S/V SN-Board (2/6) S-18...
Page 62
Model No. : TH-P42X30D/G/K/M/P/S/V SN-Board (3/6) S-19...
Page 63
Model No. : TH-P42X30D/G/K/M/P/S/V SN-Board (4/6) S-20...
Page 64
Model No. : TH-P42X30D/G/K/M/P/S/V SN-Board (5/6) S-21...
Page 65
Model No. : TH-P42X30D/G/K/M/P/S/V SN-Board (6/6) S-22...
Page 66
Model No. : TH-P42X30D/G/K/M/P/S/V SS-Board (1/2) S-23...
Page 67
Model No. : TH-P42X30D/G/K/M/P/S/V SS-Board (2/2) S-24...
Page 68
Model No. : TH-P42X30D/G/K/M/P/S/V A-Board (Foil Side) S-25...
Page 69
Model No. : TH-P42X30D/G/K/M/P/S/V A-Board (Component Side) S-26...
Page 70
Model No. : TH-P42X30D/G/K/M/P/S/V K-Board S-27...
Page 71
Model No. : TH-P42X30D/G/K/M/P/S/V C1-Board S-28...
Page 72
Model No. : TH-P42X30D/G/K/M/P/S/V C2-Board S-29...
Page 73
Model No. : TH-P42X30D/G/K/M/P/S/V SN-Board (Foil Side) S-30...
Page 74
Model No. : TH-P42X30D/G/K/M/P/S/V SN-Board (Component Side) S-31...
Page 75
Model No. : TH-P42X30D/G/K/M/P/S/V SS-Board S-32...
Page 76
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TZTNP01MJUV A-PRINT COMPLETE 1 (V) (RTL)PAVCTH TZTNP01MPUG A-PRINT COMPLETE 1 (G) (RTL)PAVCTH TZTNP01MSUD A-PRINT COMPLETE 1 (D) (RTL)PAVCTH TZTNP01MUUK A-PRINT COMPLETE 1 (K) (RTL)PAVCTH...
Page 77
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C3047 F1J1A106A043 C 10UF, 10V C3048 ECJ1VB1A105K C 1UF, 10V C3049 ECJ1VB1A105K C 1UF, 10V C3053 F1J1A106A043 C 10UF, 10V C3054 F1G1C104A077 C 0.1UF 16V...
Page 78
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C4930 F1G1C104A077 C 0.1UF 16V C4931 F1G1C104A077 C 0.1UF 16V C4941 F1J1A106A043 C 10UF, 10V C4942 F1J1A106A043 C 10UF, 10V C4952 F2H1A101A040 C 100UF, 10V...
Page 79
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C8108 F1G1C104A077 C 0.1UF 16V C8110 F1G1C104A077 C 0.1UF 16V C8112 F1K1E106A136 C 10UF, 25V C8114 F1K1E106A136 C 10UF, 25V C8116 F1K1E106A136 C 10UF, 25V...
Page 80
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C8627 F1G1C104A077 C 0.1UF 16V C8629 F1J0G2260001 C 22 UF 4 V C8630 F1J0G2260001 C 22 UF 4 V C8707 F1G1C223A081 C 0.022UF, 16V...
Page 81
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C9409 F1G1A105A047 C 1UF 10V C9411 F1G1A105A047 C 1UF 10V C9413 F1G1A105A047 C 1UF 10V C9809 F1K0J226A049 C 22UF, 6.3V 1 PAVCTH C9810 F1G1E1030005 C 0.01UF 25V...
Page 82
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C16287 F1H1H104A970 C 0.1UF, , 50V C16310 F2A2T181A007 E 180UF, 220V C16315 ECJ1VB1A105K C 1UF, 10V C16316 ECJ1XB1C104K C 0.1UF, Z, 16V C16317 ECJ1VB1A105K...
Page 83
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C16854 F1J1H104A717 C 0.1UF, 50V C16856 ECJ1VB1A105K C 1UF, 10V C16858 ECJ1XB1C104K C 0.1UF, Z, 16V C16859 F1J1H104A717 C 0.1UF, 50V C16860 ECJ1VB1A105K C 1UF, 10V C16861 ECJ1XB1C104K C 0.1UF, Z, 16V...
Page 84
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks D14909 B0ADCJ000100 DIODE D14910 B0ADCJ000100 DIODE D14955 B0ECKM000046 DIODE D14956 B0ECKM000046 DIODE D14962 B0ACCJ000048 DIODE D14976 B0ACCJ000048 DIODE D16001 B0ECLP000010 DIODE 1 PAVCTH D16002 B0ECLP000010...
Page 85
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks D16712 B0ECHR000004 DIODE 1 PAVCTH D16713 B0ECHS000002 DIODE 1 PAVCTH D16714 B0ECHS000002 DIODE 1 PAVCTH D16720 B0ECHR000004 DIODE 1 PAVCTH D16722 B0ECLP000010 DIODE 1 PAVCTH...
Page 86
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks IC14961 C0JBAB000996 1 PAVCTH IC14962 C0JBAB000996 1 PAVCTH IC14963 C0JBAA000558 1 PAVCTH IC16131 C0ZBZ0001822 1 PAVCTH IC16132 C0ZBZ0001822 1 PAVCTH IC16191 C0ZBZ0001822 1 PAVCTH...
Page 87
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks L4509 J0JYC0000068 CHIP INDUCTOR L4510 J0JYC0000068 CHIP INDUCTOR L4511 J0JYC0000068 CHIP INDUCTOR L4801 J0JGC0000020 CHIP INDUCTOR L4802 J0JGC0000020 CHIP INDUCTOR L4803 G1CR39J00009 INDUCTION COIL...
Page 88
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks Q2810 B1ABCE000015 TRANSISTOR Q2811 B1ABCE000015 TRANSISTOR Q2812 B1ABCE000015 TRANSISTOR Q3133 B1AAFB000004 TRANSISTOR 1 PAVCTH Q3134 B1AAFB000004 TRANSISTOR 1 PAVCTH Q3135 DSA200100L TRANSISTOR Q4500 B1HFCFA00026...
Page 89
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R1101 D0GA473JA015 M 47KOHM, J,1/16W R1102 D0GA683JA023 M 68KOHM, J,1/16W R1115 D0GA103JA015 M 10KOHM,J,1/16W R1117 D1BA7151A014 M7.15KOHM,J.1/16 W R1118 D0GA102JA023 M1KOHM, J.1/16 W R1121 D0GA222JA023 M 2.2KOHM, J,1/16W...
Page 90
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R3152 D0GA473JA015 M 47KOHM, J,1/16W R3153 D0GA102JA023 M1KOHM, J.1/16 W R3154 D0GA473JA015 M 47KOHM, J,1/16W R3174 D0GA473JA015 M 47KOHM, J,1/16W R3189 D1BB75R0A055 M 75 OHM,J.1/10W...
Page 91
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R4825 D0GAR00J0005 M 0 OHM, 1/16W R4826 D0GAR00J0005 M 0 OHM, 1/16W 1 (G) (S) R4901 EXB28V220J M 22 OHM 1/32 W R4902 D0GA103JA015...
Page 92
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8224 D1BA1001A014 M 1KOHM,J. 1/16 W R8225 D1BA1001A014 M 1KOHM,J. 1/16 W R8301 D0GA681JA023 M680 OHM, J,1/16W R8302 D0GA360JA023 M 36 OHM, J,1/16W 1 PAVCTH...
Page 93
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8661 D0GA560JA023 M 56 OHM, J,1/16W R8669 F1G1H470A565 C 47PF, 50V R8670 F1G1H470A565 C 47PF, 50V R8704 D1BB5362A055 M53.6KOHM,J.1/10W 1 PAVCTH R8705 D1BB1002A055 M 10KOHM,J.1/10W...
Page 94
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R9105 D0GA473JA015 M 47KOHM, J,1/16W R9108 D0GAR00J0005 M 0 OHM, 1/16W R9198 EXB38V101JV M 100 OHM 1/16 W R9203 D0GA272JA023 M 2.7KOHM, J.1/16W R9205...
Page 95
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16135 D0GB4R7JA065 M 4.7 OHM J 1/10W 1 PAVCTH R16137 D0GF1R0JA047 M 1 OHM,J,1/3W R16138 D0GF102JA048 M 1.0 KOHM,J,1/3W 1 PAVCTH R16141 D0GD100JA059 M 10 OHM,J,1/4W R16143 D0GB473JA065 M 47KOHM J.
Page 96
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16508 D0GB220JA065 M 22 OHM J 1/10W 1 PAVCTH R16509 D0GF102JA048 M 1.0 KOHM,J,1/3W 1 PAVCTH R16512 D0GB473JA065 M 47KOHM J. 1/10W 1 PAVCTH R16515 D0D52R2KA005 M 2.2 OHM,J,5W...
Page 97
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16678 D0GF202JA047 M 2KOHM,J,1/3W R16681 D0GD100JA059 M 10 OHM,J,1/4W R16682 D0GD100JA059 M 10 OHM,J,1/4W R16684 D0GB220JA065 M 22 OHM J 1/10W 1 PAVCTH R16685 D1BD1500A044 M 150 OHM,J.1/8 W...
Page 98
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R17108 D0GB101JA065 M 100 OHM,J,1/10W R17131 D0GZ1R0JA020 M 1 OHM, J,1/2W R17133 D0GZ1R0JA020 M 1 OHM, J,1/2W R17135 D0GZ1R0JA020 M 1 OHM, J,1/2W R17137 D0GZ1R0JA020...
Page 99
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks SW2057 K0F122A00031 SWITCH T8301 G5BYC0000015 TRANS T16471 G4DYA0000253 SWITCHING TRANS 1 PAVCTH T16472 G4DYA0000252 SWITCHING TRANS 1 PAVCTH TU4801 ENGS7302D5F TUNER 1 (G) (S) PAVCTH...
Page 100
Model No. : TH-P42X30D/G/K/M/P/S/V Exploded View 1 S-57...
Page 101
Model No. : TH-P42X30D/G/K/M/P/S/V Exploded View 2 S-58...
Page 102
Model No. : TH-P42X30D/G/K/M/P/S/V Packing 1 S-59...
Page 103
Model No. : TH-P42X30D/G/K/M/P/S/V Packing 2 S-60...
Page 104
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks K2CN3YY00006 AC CORD 1 (G) (V) K2CT3YY00021 AC CORD 1 (K) (M) (S) K2CT3YY00033 AC CORD 1 (P) PAVCTH K2CZ3YY00010 AC CORD 1 (D)
Page 105
Model No. : TH-P42X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TTU4TA0064 REAR COVER 1 (V) PAVCTH TUX4TA010 42HANGER METAL 2 PAVCTH TXFEA01NNUA SPEAKER L/R ASSY 2 PAVCTH TXFKP01NNUA SIDE TERMINAL COVER ASSY 1 PAVCTH...