Dell Precision M60 Service Manual page 33

Back to Contents Page
Microprocessor Thermal-Cooling Assembly
Dell Precision™ M60 Service Manual
Removing the Microprocessor Thermal-Cooling Assembly
CAUTION:
NOTICE:
as the back panel) on the computer.
NOTICE:
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the fan.
NOTE: You can remove the microprocessor thermal-cooling assembly with the fan attached.
4. Loosen in consecutive order the four captive screws, labeled "1" through "4," that secure the microprocessor thermal-cooling assembly to the system
board.
1 captive screws (4)
2 microprocessor thermal-
cooling assembly
5. Rotate the microprocessor thermal-cooling assembly up toward the side of the computer and away from the system board.
Great user manuals database on
Before performing the following procedures, read the safety instructions in your System Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
"Preparing to Work Inside the
UserManuals.info
Computer."