Black & Decker BXAC9000E Instructions Manual page 4

ENGLISH (Original instructions)
competence in handling refrigerants
recognized by associations in the
industry.
♦Repairs must be performed based on
the recommendation from the manu-
facturing company. Maintenance and
repairs that require the assistance
performed under the supervision of
SAFETY ADVICE AND WARN-
INGS
♦This appliance may be used by
children aged 8 years and over
and persons with reduced physical,
sensory or mental capabilities or lack
of experience and knowledge, if they
have been given appropriate super-
vision or training in the use of the
appliance in a safe and Understand
the dangers involved.
♦This appliance is not a toy. Children
should be supervised to ensure that
they do not play with the appliance.
♦Do not allow children to perform
cleaning and maintenance without
supervision.
♦ Install the appliance in accordance
with national wiring regulations.
♦ Leave a space of 50cm between
walls or other obstacles and the
4
appliance. Do not cover or obstruct
the sides of the appliance, leaving
at least 50 cm space around the
appliance.
♦The product requires adequate venti-
lation in order to function properly.
♦ The fuse used in the appliance is
type: 5H, electrical characteristics
250VAC 3,15 A.
♦If the mains connection is damaged,
it must be replaced. Take the appli-
ance to an authorized service center.
Do not attempt to disassemble or
repair it yourself as it may be danger-
ous.
♦ This appliance is intended for
household use only, not for profes-
sional or industrial use.
♦ Before connecting the appliance, check that the voltage
indicated on the nameplate matches the voltage on the
rating plate.
♦ Connect the appliance to a power socket that supports
at least 16 amps.
♦ The appliance plug must match the electrical socket
of the socket. Never modify the plug. Do not use plug
adapters.
♦ Do not force the connecting cable. Never use the power
cord to lift, carry or unplug the appliance.
♦ Do not wrap the power cord around the appliance.
♦ Check that the power cord is not pinched or bent.
♦ Do not allow the connecting cord to hang or touch the
hot surfaces of the appliance.
♦ Check the condition of the electrical connection cable.
Damaged or entangled cables increase the risk of
electric shock.
♦ It is recommended as an additional protection in the
electrical installation that feeds the device, the use of a
differential current device with a maximum sensitivity of
30 mA. Consult with an installer.
♦ Do not touch the plug with wet hands.