Husqvarna QHIO760P User Manual page 31

Table of Contents

Advertisement

Available languages

Available languages

To deactivate the function for only
one cooking time: Activate the hob with
.
comes on. Touch
sounds and the indicator comes off. The
control bar appears. Set the heat setting
within 50 seconds.You can operate the
hob. When you deactivate the hob with
the function is still active.
To deactivate the function
permanently: Activate the hob and do
not set the heat setting. Touch
signal sounds and the indicator comes
off. The control bars appear. Deactivate
the hob.
5.11 OffSound Control
(Deactivating and activating
the sounds)
Deactivate the hob first.
1. Touch
for 3 seconds to activate
the function.
The display comes on and goes out.
2. Touch
for 3 seconds.
or
comes on.
3. Touch
of the timer to choose one
of the following:
- the sounds are off
- the sounds are on
4. Wait until the hob deactivates
automatically to confirm your
selection.
When the function is set to
hear the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.
5.12 Power management
function
• Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
• Each phase has a maximum
electricity loading of 3680 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
until signal
• The function decreases the power of
• For cooking zones that have a
• If a higher heat setting is not available
until
• The activation of the function depends
5.13
It is an advanced automatic function
which connects the hob to a special
hood. Both the hob and the hood have
an infrared signal communicator. Speed
of the fan is defined automatically on the
basis of the mode setting and
you can
temperature of the hottest cookware on
the hob. You can also operate the fan
from the hob manually.
Operating the function automatically
To operate the function automatically set
the automatic mode to H1 - H6. The hob
is originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes the temperature of the
cookware automatically and adjusts the
speed of the fan.
electricity loading of the cooking
zones connected to a single phase
exceeds 3680 W.
the other cooking zones connected to
the same phase.
reduced power, the control panel
shows the maximum possible heat
settings.
reduce it for the other cooking zones
first.
on the number and size of pots.
Hob²Hood
For most of the hoods, the
remote system is originally
deactivated. Activate it
before you use the function.
For more information refer to
the hood user manual.
ENGLISH
31

Advertisement

Table of Contents
loading

Table of Contents