Advertisement
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Screw driver
tweezers
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
Unscrew the screws for mounting angle 1, and then remove the mounting angle 1 from the rack or cabinet.
2.
Unscrew the screws on mounting angle 2, and then remove the mounting angle 2.
3.
Remove all of the labels.
4.
Unscrew the screws on fan-assembly 3, and then remove the fan-assembly 3.
5.
Unscrew the screws on power mask 4, and then remove the power mask 4.
6.
Remove the blank panel 5.
7.
Unscrew the screws on top cover 6, and remove the top cover 6.
8.
Unscrew the screws on power bracket 7, and then remove power bracket 7.
9.
Unscrew the screws on PCB 8, and then remove PCB 8.
10. Unscrew the screws on PCB 9, and remove PCB 9.
11. Unscrew the screws on PCB 10, and remove PCB 10.
12. Remove shielding fingers 11.
13. Unscrew all the screws on the fan-assembly 3, and remove PCB 3.4.
14. Clear the yellow adhesive, if had, by the tweezers.
15. Pry the button battery up from socket.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations)
Figure 1 Remove the mounting angle 2
EL-MF877-00
Template Revision B
Figure 2 Treatments to rear panel
Tool Size (if
applicable)
2#
Page 2
Advertisement
