Table of Contents
Advertisement
Preparing for
The PG 720 is easy to transport. Prepare your device for transport as follows:
Transport
1. Set the angle of inclination on the PG 720 to 90 and insert the
1. Switch off the PG 720 and wait approximately 20 seconds.
2. Unplug all connecting cables.
3. Bring the unit into an upright position.
4. Swing the keyboard up and press it against the front plate of the unit.
5. Use the carrying handle if you only intend transporting the unit over a
6. If you are transporting the PG 720 over large distances, pack the unit with
Transporting your
Despite the fact that the PG 720 is of rugged design, its internal components
Device
are sensitive to severe vibrations or impact. You must therefore protect your
PG 720 against severe mechanical stressing when transporting it.
Use the original packaging if you have to ship the PG 720 from one location
to another.
Caution
!
Risk of mechanical damage!
Moisture or condensation in the unit can result in defects.
When transporting your PG 720 in cold weather when it may be exposed to
extreme variations in temperature, the unit should be allowed to reach room
temperature slowly before it is started up.
If condensation has formed, the unit should be left for about 12 hours (with a
temperature difference of –20 C to +20 C (–4 F to +68 F)) before being
switched on.
4
transparent safety film sheet in the CD-ROM drive.
Make sure that both latches snap into place.
short distance.
all its accessories in the carrying bag supplied.
PG 720 P Product Information Bulletin
C79000-K7076-C721-01
Advertisement
Table of Contents
