Initial Preheating; How To Set: Water Hardness - AEG BFS8800M User Manual

Frequency
Protocol
Max Power
Wi-Fi module
Frequency Bluetooth
Protocol
Max Power
EU member states covered by the provision of Directive 2014/53/EU: Belgium, Bulgaria, Czech
Republic, Denmark, Germany, Estonia, Ireland, Greece, Spain, France, Croatia, Italy, Cyprus,
Latvia, Lithuania, Luxemburg, Hungary, Malta, Netherlands, Austria, Poland, Portugal,
Romania, Slovenia, Slovakia, Finland, Sweden, Norway, Switzerland, United Kingdom, Turkey.

5.4 Initial preheating

Preheat the empty oven before the first use.
Step 1 Remove all accessories and removable shelf supports from the oven.
Step 2
Set the maximum temperature for the function:
Let the oven operate for 1 h.
Step 3
Set the maximum temperature for the function:
Let the oven operate for 15 min.
The oven can emit an odour and smoke during preheating. Make sure that the room is ventila‐
ted.

5.5 How to set: Water hardness

When you connect the oven to the mains you have to set the water hardness level.
Use the test paper supplied with the steam set.
2.4 GHz WLAN
2400 - 2483.5 MHz
IEEE 802.11b DSSS,
802.11g/n OFDM
EIRP < 20 dBm (100 mW)
NIU5-50
2400 - 2483.5 MHz
LE: DSSS
EIRP < 4 dBm (5 mW)
BEFORE FIRST USE
5 GHz WLAN
5150 - 5350 MHz
5470 - 5725 MHz
IEEE 802.11 a/n OFDM
EIRP < 22 dBm (200mW)
.
.
17/64